multi function switch in s-10

[89newtome]

how hard is it to change the multi function switch in a 86 s 10 blazer. My high beams stay on all the time and I do not hear the switch click when trying to switch to low beams. I am pretty sure it is the switch. but if anyone has any other thoughts let me know. thanks

 

[Confedneck79K30]

easy, steering column trim comes off, screws come out, switch assy comes up, connectors removed, reversed, good to go

 

[HarryH3]

The actual switch for the high/low beam selection is mounted on top of the steering column, under the dash. You don't have to remove the multi-function switch at all to replace it. There's a steel rod that goes down to the switch. If you watch closely while operating the lever, you'll see the rod moving and the switch that it attaches to.

 

[89newtome]

thanks for the help. now just got to buy the parts. thanks again