suspectdon
1/2 ton status
well I've been asking stupid questions for awhile now and I thought I should show your guys what I've been up too.
I left the welds for the quarters low so I could fill them. ( the passenger side was repaired some time ago, and they used way to much filler, so I did what I could with the quarter )
this is my first attempt
, although I've been doing it in my head for the last 5 year
. I'll put more in here. soon
this is after the rust repair.
plans are to put 33x10.5's on 15x8 10 slot rally's
mild lift if needed, just 2 inch block in rear and longer shackles up front.
ne carpet , windshield and paint.
The front bumper is Texas HUGE! it makes for a nice step while working on the engine.
I left the welds for the quarters low so I could fill them. ( the passenger side was repaired some time ago, and they used way to much filler, so I did what I could with the quarter )
this is my first attempt
, although I've been doing it in my head for the last 5 year. I'll put more in here. soonthis is after the rust repair.
plans are to put 33x10.5's on 15x8 10 slot rally's
mild lift if needed, just 2 inch block in rear and longer shackles up front.
ne carpet , windshield and paint.
The front bumper is Texas HUGE! it makes for a nice step while working on the engine.
7 years ago from a guy who moved to Minnesota from Texas, it had only been in MN for a year when I bought it and it has never been out of the shed for more than 10 hours at a time. ( I took the top off right after buying it, its never been on since
) 
.
