Name that part!!!!No seriously i have no idea what its called

[19Blaze82]

I have a1982 Blazer K5 with a three speed. I was being an idiot and did a burn out, i broke the piece that bolts to the cross member and is between the Tranny and X-fer case(looks sorta like a bellhousing), not too many 3 speed blazers in the Yard.

 

[4X4HIGH]

If it goes between the trans and t-case that would be the t-case adapter.

 

[munepit]

Yep should be an easy fix. Lucky

 

[4X4HIGH]

Yep should be an easy fix. Lucky

Might be easy but i'll bet it won't be cheap.

 

[19Blaze82]

Might be easy but i'll bet it won't be cheap.

Where can i buy them? Can I buy them? is there any fluid in the Adapter?

 

[npayton]

transmission tail housing adapter
kinda look like this?

 

[npayton]

what t case you have...203?

 

[19Blaze82]

transmission tail housing adapter
kinda look like this?

Yes except a little longer(Due to the 3speed)

 

[oakknight]

which t case and tranny do you have?

 

[19Blaze82]

what t case you have...203?

208

 

[19Blaze82]

which t case and tranny do you have?

SM465 and a Np208 X-fer

 

[oakknight]

ok 465 is a 4 speed I thought.

http://www.ebay.com/itm/81-87-chevy...pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

 

[npayton]

sm465? isnt that a 4 speed?

 

[oakknight]

Transmission (M): SM318/SM326/SM330/T-89A/T-150 3 spd. (2.47-3.50:1 First Gear)
SM465 4 spd. (6.55:1 First Gear)
Transmission (A): TH350 (2.52:1 First Gear)
TH700-R4 (3.06:1 First Gear)
Transfer Case (M): NP208 (2.61:1 Low Range)
Transfer Case (A): NP208 (2.61:1 Low Range)
Notes:

from the spec sheet

 

[npayton]

is the shift pattern .. L 1 2 3 r ?

 

[63chevyll]

Are you in Denver? If so ill be up there all weekend and I may be able to dig one up

 

[Hogback Fabrication]

Some people refer to it as a 3 speed because the shifter says L-1-2-3, but it is indeed a 4 speed transmission. It's an SM465 and you need the adapter housing, the one you need came in '81-84 1/2 and 3/4 ton trucks with the SM465 manual transmission.

We may have a good used one, I'd have to check. I know we have and/or can get brand new ones.

 

[npayton]

yeah you have a "bulldog" granny low is 6.54:1

 

[big pappa b]

My first K5 was a 6 cyl with 3 speed on the column

 

[19Blaze82]

Are you in Denver? If so ill be up there all weekend and I may be able to dig one up

Yup im in Denver, Arvada to be specific.