napa part #'s for 14bolt rear conversion needed.

[milspecjimmy]

napa part #\'s for 14bolt rear conversion needed.

i am going to make a list of what parts i think i need, and napa is the best place to get them. if any one has done this swap and knows hte part #'s it would help.
i think i need:
4 u bolts for the rear axel, 2 new steel brake lines, one extended rear rubber one, 1 dist block for the brake lines, the conversion joint. the front axel is a 44 so it will all cross right over. any thing you can think of that i missed? thanks a lot

 

[K5Dan]

Re: napa part #\'s for 14bolt rear conversion needed.

i think the u-joint is 447 that's the one i used.

 

[milspecjimmy]

Re: napa part #\'s for 14bolt rear conversion needed.

any one have the # for the extended rear line?

 

[fourwheelerjeff]

Re: napa part #\'s for 14bolt rear conversion needed.

Try part NAPA #4138068 /forums/images/graemlins/thumb.gif

 

[milspecjimmy]

Re: napa part #\'s for 14bolt rear conversion needed.

will my rough country u bolts fit the tube on the 14? or do i need those too?

 

[wayne]

Re: napa part #\'s for 14bolt rear conversion needed.

The Ujoint is #447. If you have a 10 bolt and are swapping to a 14ff the flex line will bolt right up. If going from a 10 bolt front to a D44 the lines are different. If going from a D44 to a D60 the lines are different. You can use the same lines for a 10 bolt and D60 calipers though. The ubolts are a different size from a 10 bolt to a 14ff.

 

[milspecjimmy]

Re: napa part #\'s for 14bolt rear conversion needed.

my 10 bolt front calipers will bolt right on the 44 front right? this front axel looks exactly like my 10 bolt only 8 lug

 

[wayne]

Re: napa part #\'s for 14bolt rear conversion needed.

As far as I know they will.

 

[milspecjimmy]

Re: napa part #\'s for 14bolt rear conversion needed.

ok so the front end doesnt look to be a problem, the rear needs to have a new ebrake setup, new u bolts and a conversion joint.every thing else is just so. or am i wrong?

 

[supersize75]

Re: napa part #\'s for 14bolt rear conversion needed.

yes they will bolt up, just did it /forums/images/graemlins/grin.gif

 

[supersize75]

Re: napa part #\'s for 14bolt rear conversion needed.

.u-joint is 23.00 get te u-bolts from the junk yard, and plates too. or get one u-bolt take measurements and have new ones made.