narrowed down cam intake carb

[TC4x4]

These are for Project Second Life The 78:

I think that i have narrowed it down, wanted to make sure these go together well... for a street truck its becoming....

intake
http://www.jegs.com/i/Edelbrock/350/7561/10002/-1

cam/lifter kit
http://www.jegs.com/i/Edelbrock/350/2162/10002/-1

carb
http://www.jegs.com/i/Edelbrock/350/1411/10002/-1

Also, (noob question) how do i tell if it is a manual or electric choke?

 

[TC4x4]

any thoughts?

 

[Greg Ducato]

Should be a nice responsive combination that adds noticeable power.

 

[79rustyk10]

Should be a nice responsive combination that adds noticeable power.

X2. I say good call on the intake too. Myself, I dont see the point of that performer intake over the stock one other than its aluminum.

I had their performer cam in a small block and it was far better than the stock cam in every area. I would expect similar if not better resuluts in a big block.

 

[MNorby]

how about this carb...?
http://coloradok5.com/forums/showthread.php?t=278233

 

[KansasTwister]

Thats not a carb, its a throttle body, and for fuel injection, different ball park.

 

[MNorby]

exactly, why spend $$$ and still have a carb?

 

[KansasTwister]

exactly, why spend $$$ and still have a carb?

Simple.

intake
comupter
fuel tank
fuel plumbing
computer and wiring
etc.


I mean, i wanna put a tbi system on my k5 eventually, but i think he just wants to carb it for now.

 

[MNorby]

take the $300 for the carb and go to the junkyard and get all of that. I just finished a tbi swap, it was easy and cheap.

 

[1BEATK5]

These are for Project Second Life The 78:

I think that i have narrowed it down, wanted to make sure these go together well... for a street truck its becoming....

intake
http://www.jegs.com/i/Edelbrock/350/7561/10002/-1

cam/lifter kit
http://www.jegs.com/i/Edelbrock/350/2162/10002/-1

carb
http://www.jegs.com/i/Edelbrock/350/1411/10002/-1

Also, (noob question) how do i tell if it is a manual or electric choke?

there are so many better cams than that , with computer designed profiles, and alot more dyno testing. thats a 20 year old grind that was designed by someone else. call comp cams or lunati, or anybody else, tell them what you want the truck to do, and take their suggestion.

thats a good intake.
i would get youre original q-jet modded from a place like jet. q-jet delivers better throttle response, and better mileage