Need driveshafts

[gone huntin]

I need a rear drive shaft for a Suburban with the sm465/np205 fixed yoke combo. I also need a front drive shaft for the same combo. I could use a rear shaft from a lwb truck with the same combo, it's only 2" longer.

 

[sbyarlay]

Is this the front your looking for?

 

[gone huntin]

Nope, that's for an np203, I have that one now. The np205 uses a flange instead of a yoke on the front drive shaft.

 

[rob h]

Ill be taking off what you want this week, I have a 465/205 combo. My shaft has 3 new greaseable joints and is in good shape, 4 bolt flange on one end and a joint at the other........let me know..

 

[gone huntin]

PM sent Rob

 

[gone huntin]

Deal fell through, just gonna rebuild my th350.

 

[gone huntin]

It's back on, but it comes with a front shaft so now I just need a rear driveshaft for a Suburban or a lwb truck with a 465/205 combo with a fixed yoke.

 

[Brett68]

What years were the 465/205 combo available? Just pulled a pair of exhaust manifolds out of an 88 Suburban in the local pick a part. It was a 465, did not look at the xfr case.

 

[gone huntin]

It would probably have a 208 behind it with a slip yoke. Thanks for trying though. It'll probably have to be mid to late 70's.

 

[K5Nate]

I have a 205 - 14FF fixed yoke shaft but it is only 36" due to a doubler. would need to be lengthened.

 

[K5Nate]

Rear would need to be lengthened!

Have a front 465/205 also if you still needed it!