NEED HEEP......How do I get the bearing out (14 Bolt)

[BlueOx]

I took the hubs off the 14 bolt axle and was able to get the inner bearing out by just removing the seal. I turned the hub over to take the outer bearing and observed there to be a snap ring holding it in. I thought once I removed the snap ring the bearing would just fall out; not the case. I pounded on the other side to get it out but, no luck. So, how do you get these things out?

Thanks,
Charles

 

[8_YOUR_H2]

The bearing and race have to be pressed out together.

 

[BlueOx]

Thats what I thought. Looks like I'll be taking it to the drive-line shop.


Charles

 

[beater74]

all you need is a brass drift and BFH. done mine this way and no probs.