Need help finding missing BANKS turbo parts...

[linx310]

I purchased a used Banks turbo setup a few months ago and it is missing some parts.

Attempts to contact Banks in regards to replacements have been unsuccessful since I was not the original purchaser.

The parts that I need that seem to be unique are the two pressure chamber studs and spacers.

Here is a picture from 4wheeler magazine of the pieces I need.

2 WASHER, Thread Sealing O-Ring, 5/16”. . . . 60 91209
2 STUD , Pressure Chamber (EGR). . . . . . . . 50 91015
2 SPACER, P.C. Stud, 5/16”. . . . . . . . . . . . . . . 61 91019
5 WAS HER, 5/16” SAE. . . . . . . . . . . . . . . . . . . 43 91202
4 NUT, Nylock, 5/16”–24, Hex. . . . . . . . . . . . . 53 91211



Here are some of the other parts I need for the 6.2 liter sidewinder setup, I can probably find other sources for them, but the gaskets concern me the most:


1 GASKET, Pressure Chamber. . . . . . . . . . . 34 93060
1 GASKET, Turbine Outlet . . . . . . . . . . . . . . 31 93001
1 GASKET, Exhaust Crossover. . . . . . . . . . . 33 93155
1 GASKET, Oil Drain. . . . . . . . . . . . . . . . . . . 32 93040
1 HOSE , Assembly, Teflon, –4 AN x 58”.. . . . 94080 (this was damaged during shipping)

Listing by just part #
91209
91015
91202
91211
91019
93060
93001
93155
93040
94080

Here is a pic of every thing i have

So do any you guys have any ideas on what should I do?

Are any of you banks dealers who can get me these parts?

 

[linx310]

Well I have tried searching for the parts and have run out of ideas...seems I may have to fabricate them myself.

Why does banks produce part list if no one has the parts to sell.

 

[brian wafer]

when i install mine .3 years ago i was missing bottom radiator hose,when i phone banks the guy told me they were slowly discontinuing the set up!!! so i got 2 hoses,one for a spare.

 

[Mikey von]

I am surprised banks was not much help. I have called them many times and they have even offered to make parts (down pipe) for me that they do not stock and have discontinued. I informed them I purchased used.

Can you not find a stud and washers similar at the parts store? It seems like most any kind of stud can be made to fit there.

 

[imiceman44]

Well I have tried searching for the parts and have run out of ideas...seems I may have to fabricate them myself.

Why does banks produce part list if no one has the parts to sell.

I think I might have those studs, I will need to check and it might take me a week or more but if I have them they are yours for the price of shipping.
I am rarely home and very busy so if I don't respond in a week, send me a PM to remind me.

 

[linx310]

I think I might have those studs, I will need to check and it might take me a week or more but if I have them they are yours for the price of shipping.
I am rarely home and very busy so if I don't respond in a week, send me a PM to remind me.

Thanks.

 

[67_C-30]

I purchased a used Banks turbo setup a few months ago and it is missing some parts.

Attempts to contact Banks in regards to replacements have been unsuccessful since I was not the original purchaser.

The parts that I need that seem to be unique are the two pressure chamber studs and spacers.

Here is a picture from 4wheeler magazine of the pieces I need.

2 WASHER, Thread Sealing O-Ring, 5/16”. . . . 60 91209
2 STUD , Pressure Chamber (EGR). . . . . . . . 50 91015
2 SPACER, P.C. Stud, 5/16”. . . . . . . . . . . . . . . 61 91019
5 WAS HER, 5/16” SAE. . . . . . . . . . . . . . . . . . . 43 91202
4 NUT, Nylock, 5/16”–24, Hex. . . . . . . . . . . . . 53 91211



Here are some of the other parts I need for the 6.2 liter sidewinder setup, I can probably find other sources for them, but the gaskets concern me the most:


1 GASKET, Pressure Chamber. . . . . . . . . . . 34 93060
1 GASKET, Turbine Outlet . . . . . . . . . . . . . . 31 93001
1 GASKET, Exhaust Crossover. . . . . . . . . . . 33 93155
1 GASKET, Oil Drain. . . . . . . . . . . . . . . . . . . 32 93040
1 HOSE , Assembly, Teflon, –4 AN x 58”.. . . . 94080 (this was damaged during shipping)

Listing by just part #
91209
91015
91202
91211
91019
93060
93001
93155
93040
94080

Here is a pic of every thing i have

So do any you guys have any ideas on what should I do?

Are any of you banks dealers who can get me these parts?

You should call them back and tell them you bought it new. If they ask about the dealer, tell them you bought it new from a dealer that sold them on Ebay and you don't remember the name.