CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

need help wiring problems

the hulk

Registered Member
Joined
Feb 9, 2003
Posts
40
Reaction score
0
Location
phx az
hey guys need help with my engine bay harness i got a new harness from ricks pick up part here in town it come already made up , nice but my problem is off to the side just above whare the new harness plugs in at there a old harness that comes throw the fire wall there like fire wire coming out of it not sure what they go to here a pic showing what im talking about /forums/images/graemlins/confused.gif
IM000460.JPG
 
ok here is a new pic the wires in my hand run back throw the fire wall , when i pulled it apart i did not mark it i know im a dumbass , if anyone one know what thay go to pls let me know can find them in my wiring diagram in my shop maunel
untitled.JPG
 
The brown prob. goes to the proportioning valve by the master cylinder.
The large pink and the brown,blue and yellow might go to the external voltage regulator(if you still have one).

Is that a green or blue wire all by itself?
Anyway I don't know about that one.

What year truck is it.The year does make a difference.

I looked in your profile.If it's the 72 blazer you list the white connector and the stand alone blue(or green,my monitor is crappy) might be for the TCS system.It was introduced in 71 as a emissions add on.There should be a pair of relays just to the right of where that harness comes out of the firewall.Most people have long since removed that emisions crap.
 
Well I just looked at my TCS wiring I removed from my 71 Blazer about a month ago and the white connector is definitley part of the TCS system.

The single blue/green wire prob would have gone to one of the 2 relays that would have mounted to the right of where it comes out of the firewall.

The large red may have been the wire that energized the solenoid.The solenoid would have been mounted on the carb.

The brown wire is prob. connected to one of the 2 reays as well.
All those wires are on the TCS harness I removed from my Blazer.
 
AHHHH!!!! I had all that crap on my blazer when I rewired it and was wondering what it was. I thought it was just a bunch of a/c junk. I feel releived because it sure looked like too many wires for the a/c. I guess the previose owner was smart enough to scrap the emisions junk.
 
thanks guys for all the help thats what them wires are for the tcs , well i don't need any of it so its all gone now it looks better under the hood , thanks for the help would have never got it on my owen /forums/images/graemlins/thumb.gif http://members.cox.net/randyk72/
 

Latest Posts

Top Bottom