Need help with wire that goes to top of proportion valve

[k51977blazer]

I have a 1976 blazer and I can’t find the wire that goes to the top of the proportioning valve to the firewall im assuming,i have the wire that goes on the proportioning valve, it does have a aftermarket wire harness in it,I have the tab to plug it to but no wire anybody have any pictures or can point me in the right direction
Thanks

 

[Bowtiek10]

Should run from the fuse panel area on the drivers side down to the prop valve. I think its brown if I remember correctly.

 

[k51977blazer]

Should run from the fuse panel area on the drivers side down to the prop valve. I think its brown if I remember correctly.[/QUOTE
Ok thank you I appreciate it

 

[k51977blazer]

Do you know if it is with wires that go to the headlights

 

[Bowtiek10]

Do you know if it is with wires that go to the headlights

I believe its with those wires yes. I rewired my truck with a painless kit, but I believe the original harness was this way.

 

[k51977blazer]

I believe its with those wires yes. I rewired my truck with a painless kit, but I believe the original harness was this way.

I believe I have a painless wire kit as well I’ll have to cut the tape off and see if there is a wire for it I’m sure there has to be

 

[Bowtiek10]

Just looked this morning. To confirm it is coming from the fuse panel, it is brown with white stripe

 

[k51977blazer]

Awesome thanks man

 

[k51977blazer]

Just looked this morning. To confirm it is coming from the fuse panel, it is brown with white stripe

Was it wrapped in with the headlight wiring

 

[Bowtiek10]

Was it wrapped in with the headlight wiring

Affirmative

 

[k51977blazer]

Affirmative

These are what I have wrapped with headlights there all labeled which is awesome but nothing for the proportioning valve

 

[k51977blazer]

These are what I have coming out