CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Need pics of an 89 TBI with hedders on

I don't have a picture off hand. But on my truck which has the same setup. I just bent the power steering bracket up where it used to attach to the old manifold. I was going to cut it off but decided against in case I were to switch back or swap for some reason.
 
I got the Edelbrock headers and they came with some spacers for the bracket. Just steel tube about 3/4 to 1" dia between the header flange and PS bracket. Sorry no pic.
 
Matt -- Just need to put some spacers in there. I've got what you need, and will be in the city tommorow.

I'll be at 116th street, and 108th ave, working on a suite in an apartment building there. Turn left off 116th street southbound onto 108th ave, then take your first right into the back alley. Building is the second on the right. my stepper will be behind that building if I am still around. Its rust and silver colored, with some black grey and red stripes down the side.

I'll leave all the spacers / washers in the back of my 77 stepper -- If you get around, feel free to grab em :)

Won't be there for long, just a few hours in the morning (get there around 11:00 or so)
 
Haha, hopefully I catch you :) I might be outside installing a light on the side of the building :)

If I leave before you arrive, I'll leave the spacers on the picnic table in the back-yard.
 

Latest Posts

Top Bottom