CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
need some quick help
- Thread starter basing110
- Start date
- Joined
- Feb 17, 2000
- Posts
- 1,009
- Reaction score
- 185
Leper
1/2 ton status
Looked to me like he was asking about the 14 bolt rear.
I don't know the answer to your question. There are 3 different widths, I believe, for the 14 bolts.
Are you asking about WMS widths or backing plate width?
67.5 for my srw14ff out of a 3/4 ton. My front d60 is 69", i bet the front 44 is close to 69".
- Joined
- Feb 17, 2000
- Posts
- 1,009
- Reaction score
- 185
[FONT=Arial, Helvetica, sans-serif]if you click you find the folowing:[/FONT]
[FONT=Arial, Helvetica, sans-serif][/FONT]
[FONT=Arial, Helvetica, sans-serif][/FONT]
[FONT=Arial, Helvetica, sans-serif]The rear ends seem to be 3" narrower than the frontends pretty consistently, with the exception of the van 1/2T rears, which are 4" wider than a truck 1/2T rear. [/FONT]
[FONT=Arial, Helvetica, sans-serif]Here are some measurements we found:
6 lug 10 bolt front - 67 1/2"
8 lug 10 bolt front - 69 1/2"
1/2T van rear - 68"
14 bolt (10.5) rear - 67"[/FONT]
[FONT=Arial, Helvetica, sans-serif]These are all wheel face to wheel face.[/FONT]
[FONT=Arial, Helvetica, sans-serif][/FONT]
[FONT=Arial, Helvetica, sans-serif][/FONT]
[FONT=Arial, Helvetica, sans-serif]The rear ends seem to be 3" narrower than the frontends pretty consistently, with the exception of the van 1/2T rears, which are 4" wider than a truck 1/2T rear. [/FONT]
[FONT=Arial, Helvetica, sans-serif]Here are some measurements we found:
6 lug 10 bolt front - 67 1/2"
8 lug 10 bolt front - 69 1/2"
1/2T van rear - 68"
14 bolt (10.5) rear - 67"[/FONT]
[FONT=Arial, Helvetica, sans-serif]These are all wheel face to wheel face.[/FONT]
