Neutral Safety Switch

[Adventurous 4x4]

On a 90 K5. I am building it into a truggy and it will have a aftermarket steering set up so the stock column will be tossed. I need to know if I have to bypass the neutral switch so it will start? If so can I just tie the wires together? I will be using a ign switch with button starter. Anybody have good wiring diagrams on what wires I need to use off the column for the start switch? Yeah, I hate wiring!!!

 

[USSkoval]

You will connect the yellow and purple wires together. They are thick ones.

 

[Adventurous 4x4]

You will connect the yellow and purple wires together. They are thick ones.

Thanks. Do you know where to find good wire diagrams? I know somebody had posted some in the past but I never saved the link.

 

[duanel]

on my 75 its just connecting the two purple together take the plug that plugs into the Neutral Safety Switch take a short section of same gauge wire add spade connections to both ends and put the end in the plug works for me as for wiring diagrams http://brochures.slosh.com/ under wiring has some.