Dafey
1/2 ton status
Where`s a good place to get one? For a good price Im a poor boy.. 
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
new drive shaft
- Thread starter Dafey
- Start date
Depends on what you need...so, what do you need? Complete new high angle CV shaft, or just U-joints, or possibly a re-tube?
Most local driveline shops are reasonable, especially if what you want or need isn't out of the ordinary.
Rene
Most local driveline shops are reasonable, especially if what you want or need isn't out of the ordinary.
Rene
chevy wrangler
1/2 ton status
down here you can get one fairly low buck but heavy duty at "u-joints" on Rojas Dr.
11213 Rojas Dr.
El Paso, Tx 79935
(915)539-8213
11213 Rojas Dr.
El Paso, Tx 79935
(915)539-8213
Dafey
1/2 ton status
Well mines to short now after doing a 4" lift , by about 2 1/2 inches. So I need it lengthend..
But I cant drive to El Paso. And no one here in Roswell [ that I can find in the book ] will touch it.
But I cant drive to El Paso. And no one here in Roswell [ that I can find in the book ] will touch it.
SCOOBYDANNN
1/2 ton status
I got mine from J.E. Reel driveline. same quality as high Angle, little less expensive.
Jimbo*
1/2 ton status
Southwest Bearing on McGaffey does them, talk to Steve. If you need help, let me know.
Jimbo
Jimbo
Dafey
1/2 ton status
Already called him.. I called NAPA on the outside chance they MIGHT do it,because they have a machine shop, or tell me who does.And he told me about SW bearing.So I called them and I talked to the guy [pretty sure it was Steve] for like 15 mins. Anyway he wants ,ballpark with out seeing it , just under $200 . And I think he said thats with U-joints..
