WJACKSON11X
1/2 ton status
I tore apart a 205 over 2 years ago to do a complete rebuild, but never got it put back together. Does anybody have any info on assembly? Preferably with step-by-step pics. Should have done it 2 years ago
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Np205 assembly help
- Thread starter WJACKSON11X
- Start date
454Sub
5/8 ton status
Did you pull it totally apart? Like removing the idler shaft and stripping it down to a bare case?
I tore apart a 205 over 2 years ago to do a complete rebuild, but never got it put back together. Does anybody have any info on assembly? Preferably with step-by-step pics. Should have done it 2 years ago
I had a nice writeup and a ton of pictures of a rebuild and comparisons of slip vs fixed yoke and different speedo clocking positions, etc. but Webshots deleted all the pics. All I could find left was:
http://coloradok5.com/forums/showthread.php?t=49876&highlight=205
If anyone somehow saved my old pics (maybe downloaded to a PC), and would share them again it would be appreciated.
WJACKSON11X
1/2 ton status
Yeah, tore it down all of the way. Removed idle pulley and painted the case. I've got a brand new rebuild kit waiting to be installed. I know I can do it, just need some help with it.
everything is in my link i posted. if you cant get it from that then i dont know what you need. 
WJACKSON11X
1/2 ton status
everything is in my link i posted. if you cant get it from that then i dont know what you need.
Yeah, I read through that lastnight. Thats what I needed. Thanks!
no problem 
