BLZN4FN
1/2 ton status
Hey all I want to swap out my ft and rear yokes on my 205 but having a hard time locating a place that sells flanges. Any help pointing me to a place that sells them that would help alot
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
NP205 Flanges
- Thread starter BLZN4FN
- Start date
I'm sure high angle driveline does.
Here in Denver, try drivetrain industries: http://www.dexknows.com/search.ds;jsessionid=5D24A77DFD243E8206E456986834D493.worker5
I bet they have what you need too and are priced right.
Here in Denver, try drivetrain industries: http://www.dexknows.com/search.ds;jsessionid=5D24A77DFD243E8206E456986834D493.worker5
I bet they have what you need too and are priced right.
5280k5
1/2 ton status
HAD is where I got mine. Front output will need to be 32 spline if it's not already.
They were like $100 each.
They were like $100 each.
clstolten
1/2 ton status
- Joined
- Sep 4, 2002
- Posts
- 356
- Reaction score
- 0
A stock front flange can be machined (pilot diameter) for most cv's. I am using an NP241 front flange on the rear of my 205. bolts right on, but is not as beefy as the aftermarket stuff. I talked with Tom Woods and they sell the flanges you need for the front and rear outputs.
