I'm reassembling a pair of 208's and the fit up between the planetary and annulus seems a bit sloppy even with all thrust washers and the bushing in place. Is some axial slop between the two acceptable or does this indicate thicker washers are necessary?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Np208 planetary/annulus bushings/thrustwashers
- Thread starter rcamacho
- Start date
Hossbaby50
3/4 ton status
I dont remember how much slop there is there but I know the replacement parts are available. I replaced the annulus bushing in my initial 208 rebuild several years ago. I believe I got the bushing from www.drivetrain.com
Harley
Harley
I replaced the annulus bushing last evening and it tightened the assembly up radially. The thrust washers are in good shape but there is still some axial play that could be addressed. I'd need to spend some time with an additional washer and a lathe or bench sander to take up the slop. Not sure I'm inclined though. My local trasmission supply company indicated this is normal by design....
