NP241 front output yoke needed

[thorguy57]

My front output seal was leaking on my 90 blazer so I decided to change it out. My yoke is pretty wore so I really don't like putting it back like that. I was trying to search the web for one but they are pretty hard to find. I was just going to buy a new one if it wasn't to much. If it is a lot I will just buy a speedy sleeve. My battery was dead on my calipers so I can't measure it until I get a new one. Any help will be appreciated. Thanks

 

[ktmoutfront]

Buy a Speedy Sleeve. Silicone goes on yoke then press the sleeve on. Can be done with a vise. I have saved a number of yokes this way.

http://www.alliedbearings.com/mfg_prod/seals/cr_speedi/index.html

 

[GRINCH]

Always had good luck with these folks.

http://www.tbtrans.com/transfer_case.htm

You could also try
http://www.drivetrain.com/parts_catalog/transfer_case_replacements_and_parts/np241.html#Illustration

Also try searching on companion flange

 

[thorguy57]

Damn screw the speedi sleeve option. Was looking online and they were like $60. I can just buy a yoke for that.

 

[ktmoutfront]

I bought mine locally for $25.

 

[thorguy57]

who from?

 

[ktmoutfront]

Local bearing store. Whistler Bearing.