I need the arm that connected to the transfer case for the NP 241C. It is different from the 208 because it was clocked about 20 deg from how the 208 is. Thank you for your help!
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Found NP241 shift arm
- Thread starter firemedicsafd
- Start date
Still need one?
I modified mine by cutting out the old one and welding the new spot into it. But it is a weld. I would like one made from the factory. How much?
I think I may have misunderstood what you needed. I have the rod that goes between the shifter and the t-case. You need the lever on the t-case though, right?
If you need the lever that connects to the t-case housing, I may have one. Please confirm what it is you actually need, as @gone huntin stated.
Do you mean the range shift lever pictured here?
Do you mean the range shift lever pictured here?
i need the arm directly bolted to the transfer case. it has the rectangle cut out of it at the transfer case end and a circle out of the other end for the linkage.
How do you want the money?
I did not have any issues with my 4x4 set up on my 241 when i changed over from a 208
Found 2. Thanks for all who helped!!!
