NV4500 clutch hose fittings?

[broncoman6524]

Apparently I can't search for a damn this evening, I've done this back to my F-body but I've since lost my part numbers.

I've got a 94 NV4500, therefore it's the external slave, I presume for that fitting it's the O-ring seal, with a roll pin that fastens the line securely?

What's the thread pitch on the master side?

Thanks guys..

 

[broncoman6524]

Started going through old threads on Tech I had saved, came across this part number which I'm fairly positive will work on the NV4500 slave.

http://www.summitracing.com/parts/rus-640281/overview/

 

[bronc3buster842001]

Started going through old threads on Tech I had saved, came across this part number which I'm fairly positive will work on the NV4500 slave.

http://www.summitracing.com/parts/rus-640281/overview/

Those will work... I made my own fittings... Cut the plastic line off the fitting, then brazed a -3 an fitting to it...