CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
off topic... sorry
- Thread starter riz
- Start date
Make sure valve core is out, use a ratchet strap or even a good bungee tightened around the center will help push the beads out toward the rim. A good coating of dish or car soap on the beads can help also, a locking air chuck makes it easier as well. When attempting to air it up sometimes giving a good quick squeeze from opposite sides can help the beads seat as well. 
wasted wages
1 ton status
remove valve core.......starter fluid...... match......done
I would not use starting fluid trick on todays wheelbarrow tires,that are more like inner tubes with tread,chances are it'll blow apartt and kill ya!..
I change a lot of smaller tires on lawn tractors,and other things..hand truck $" tires SUCK to get mounted,some have rims with no "bead" for the tire to seat against,like they were supposed to use tubes,but never came with any!...
I usually get stubborn tires seated by taking out the valve stem core,then I soap up the tires beads good,and if I cant get it to pop the beads,I get a steel bucket or pan that is slightly larger than the rim is,and place the pan under the tire--then I use something to cover up the lug holes and center hole like a round lid off a pan ,and press down on the rim & tire while applying air pressure--the air escaping from the lower bead gets trapped in the bucket,and forces the tire onto the rims beads...usually works slick,and its harder to decribe how,than to DO it....I have done thins to car tires when mounting regular sized tires on wide rims,you just need a bigger bucket!--a steel trash can works for me!..
I change a lot of smaller tires on lawn tractors,and other things..hand truck $" tires SUCK to get mounted,some have rims with no "bead" for the tire to seat against,like they were supposed to use tubes,but never came with any!...
I usually get stubborn tires seated by taking out the valve stem core,then I soap up the tires beads good,and if I cant get it to pop the beads,I get a steel bucket or pan that is slightly larger than the rim is,and place the pan under the tire--then I use something to cover up the lug holes and center hole like a round lid off a pan ,and press down on the rim & tire while applying air pressure--the air escaping from the lower bead gets trapped in the bucket,and forces the tire onto the rims beads...usually works slick,and its harder to decribe how,than to DO it....I have done thins to car tires when mounting regular sized tires on wide rims,you just need a bigger bucket!--a steel trash can works for me!..
Put a tube in it.....Fill with air.
Confedneck
3/4 ton status
use a real air compressor, something with 150psi, squeeze and blast
I'd agree with the tube,one of those "Slime" tubes costs about as much as a new tire though,about 10 bucks...the newer wheelbarrow rims suck,they are real narrow and have steep angled "beads" with no ridge around the inner diameter ,so the tires come off the bead teal easy, if they go soft ---"tubing" them is a better way to stop them from being flat every time you go to use it--they sell "flat proof" tires already on rims now at Home Depot and Lowes,some use Slime tubes and some are solid foam,those solid ones can be very expensive though...but you'll never have to touch it again!..
I have 3 wheelbarrows,and the one I use most often has a semi-pnumatic tire on it--I grab that one first knowing dam well the other 2 will have flat tires!..the solid tire makes for a rougher ride and it'll sink in mud easier,but that wheelbarrow is smaller and eaasier to handle so I use that one the most..
I read on a tractor frum some guys who run dune buggies have used liquid laundry starch to "punture proof: their tires ,instead of Slime,supposedly it works just as good and some members on that site tried using it too,and said it seems to work well...not sure if it might rust up the rims bad like Slime can though..
I have 3 wheelbarrows,and the one I use most often has a semi-pnumatic tire on it--I grab that one first knowing dam well the other 2 will have flat tires!..the solid tire makes for a rougher ride and it'll sink in mud easier,but that wheelbarrow is smaller and eaasier to handle so I use that one the most..
I read on a tractor frum some guys who run dune buggies have used liquid laundry starch to "punture proof: their tires ,instead of Slime,supposedly it works just as good and some members on that site tried using it too,and said it seems to work well...not sure if it might rust up the rims bad like Slime can though..
todays lawn/garden tires are crap. i always tryed if not just installed a tube with everyone i could at work. otherwise thay were back in 1 year. dry rot and wont hold. put tube in and good to go.
if me on wheelbarrow use or lawn cart trailer. go get solid foam filled.
if me on wheelbarrow use or lawn cart trailer. go get solid foam filled.
, not always the fastest way, but, it usually works, I've done it many times if a good compressor wasn't available, works on ATV tires as well.
