CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Oh Wow! CL gem! Check it out!
- Thread starter munepit
- Start date
Wow. Just wow.
Shakes head...
Are the four different color wheels part of the "custom" job????
Took the dubs off to pay his dealer...
Am I the only one who thinks the tire on the steel rim is larger than the other 3?
drew4x4
1/2 ton status
the 4.3 is a 262 ci engine, he bored out 90 inches to 350! wow!
Assuming no stroker crank, that's a bore of 4.62", compared to 4.00" stock. This is a real problem for an engine with 4.4" bore centers!
Try going to a machine shop and ask them for a .62 over-bore. That would be 466ci on a 350 with stock crank. Actually, there would be no displacement as each bank of cylinders would be siamesed together. Even if it was bored 0.1" over, it would require the stroke to go from 3.48" (stock) to 4.4"!
So either he's crazy or he means an engine swap, not bore.
Try going to a machine shop and ask them for a .62 over-bore. That would be 466ci on a 350 with stock crank. Actually, there would be no displacement as each bank of cylinders would be siamesed together. Even if it was bored 0.1" over, it would require the stroke to go from 3.48" (stock) to 4.4"!
So either he's crazy or he means an engine swap, not bore.
