trollporter
1/2 ton status
Parting out the ol' Blaze and need to get rid of a few things. This stuff is located in Beaufort, SC for pick up or delivery is posible if i'm heading your way or I can ship. Also I will be at River Rock ORV this weekend for the Crawl Magazine Photo Shoot and can bring it with me if you are going to be there.
-ORD 2.5" Shackle flip for '73-'87('91 sub and blazer) ORD part#:GU38012 I'll also throw in all of the greasable bolts/bushings for both ends of the rear springs. These bushings may not fit your springs if they aren't superlift but you can use these bolts and sleaves with the correct bushings from ORD. I make no promises on bushing condition but bolts and sleaves are good $100 + shipping
-Swaybar Disconnects for '73-'87('91 sub and blazer) ORD part#:GU37001 These are missing the little angle braket that bolts to the bump stop to hold the swaybar up when disconneceted. It shouldn't be a big deal to make a piece of angle with 2 holes in it. There is a pic of it on ORD's web site. I will throw in a set of Daystar greasable swaybar frame mounts. $65 + shipping
-Heckthorn side-by-side dual steering stabalizer bracket. No stabalizers, just the brackets. This was on a 10 bolt but the holes are slotted and it looks like it will fit a D60 too. $25 + shipping
-M.O.O. Offroad Rear Inboard Shock Crossmember. This is just the crossmember and all related hardware. It doesn't include the axle tabs because they were weld on and probaly wouldn't be much left if I tryed to cut them off. Shouldn't be a big deal to make some or Kurt at DIY4x makes some really nice ones that bolt on or weld on style. $100 + shipping.
-6" Front Springs off of the '90 K5. Flex very well. Needs new rear bushings. WILL NOT SHIP but may be able to meet up if i'm heading your way. $150
-Rear Tire carrier/Bumper. This was built using the Rockstomper DIY Kit. A 39.5 will fit perfect with the bottom of the tire resting on the reciever. SUPER STOUT!!! $200 Will not ship! Bumper pics further down the page.
-ORD 2.5" Shackle flip for '73-'87('91 sub and blazer) ORD part#:GU38012 I'll also throw in all of the greasable bolts/bushings for both ends of the rear springs. These bushings may not fit your springs if they aren't superlift but you can use these bolts and sleaves with the correct bushings from ORD. I make no promises on bushing condition but bolts and sleaves are good $100 + shipping
-Swaybar Disconnects for '73-'87('91 sub and blazer) ORD part#:GU37001 These are missing the little angle braket that bolts to the bump stop to hold the swaybar up when disconneceted. It shouldn't be a big deal to make a piece of angle with 2 holes in it. There is a pic of it on ORD's web site. I will throw in a set of Daystar greasable swaybar frame mounts. $65 + shipping
-Heckthorn side-by-side dual steering stabalizer bracket. No stabalizers, just the brackets. This was on a 10 bolt but the holes are slotted and it looks like it will fit a D60 too. $25 + shipping
-M.O.O. Offroad Rear Inboard Shock Crossmember. This is just the crossmember and all related hardware. It doesn't include the axle tabs because they were weld on and probaly wouldn't be much left if I tryed to cut them off. Shouldn't be a big deal to make some or Kurt at DIY4x makes some really nice ones that bolt on or weld on style. $100 + shipping.
-6" Front Springs off of the '90 K5. Flex very well. Needs new rear bushings. WILL NOT SHIP but may be able to meet up if i'm heading your way. $150
-Rear Tire carrier/Bumper. This was built using the Rockstomper DIY Kit. A 39.5 will fit perfect with the bottom of the tire resting on the reciever. SUPER STOUT!!! $200 Will not ship! Bumper pics further down the page.
Last edited:
