CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
paint question
- Thread starter 1BadK-30
- Start date
85-m1028
1/2 ton status
I mean the Imron pigment, seems like you have take it right off the shaker straight to the gun. I suppose this should done anyways, but I don't have a shaker set up.
I got paint home "Imron, semi gloss, color was like a john deer green" where it sat for a few hours. Stired and mixed in the catlyst and shot 2 coats. The color looked exactly like a pack of wrigleys spearamint gum!!
I got paint home "Imron, semi gloss, color was like a john deer green" where it sat for a few hours. Stired and mixed in the catlyst and shot 2 coats. The color looked exactly like a pack of wrigleys spearamint gum!!
Oh, okay, gotcha...
Yeah, Imron solids settle pretty good... Definitely need to make sure there's no solids at the bottom of the can...
Haha, ya think Imrons bad with that, you should see some of the high solids epoxy primers I use.. You'd swear it's concrete at the bottom of the can...
Tho we have a shaker at work, I also use one of these on a drill often...
Yeah, Imron solids settle pretty good... Definitely need to make sure there's no solids at the bottom of the can...
Haha, ya think Imrons bad with that, you should see some of the high solids epoxy primers I use.. You'd swear it's concrete at the bottom of the can...
Tho we have a shaker at work, I also use one of these on a drill often...
