Part # for the Ingersoll-Rand impact....

[chevyfumes]

As usual the search feature doesn't work worth a flyin ****.So I need to know what wrench is the bad boy that everybody talks about.... /forums/images/graemlins/deal.gif

 

[jjlaughner]

2135?

 

[jjlaughner]

2135qti quite version with a longer nose

 

[chevyfumes]

Damn that suckers spendy....I was also looking at a husky from homo depot and it's 500ft. lbs. for 100 bucks, now I might be able to pull that much off, the woman might get a little pissed if I spent almost 300.... /forums/images/graemlins/rotfl.gif /forums/images/graemlins/rotfl.gif /forums/images/graemlins/rotfl.gif

 

[jjlaughner]

I just bought an electric impact, I like it just as well, less hassell than with tanks and hoses. Toss an extension cord out with the welder or grinder... it can run the impact also. I took axle shaft bolts, steering arm nuts and ball joint this past week. /forums/images/graemlins/waytogo.gif WILL BE REAL EASY ON THE TRAIL (if I ever make it there /forums/images/graemlins/doah.gif) since I'm going to get one of the marine power inverters for the back of the truck /forums/images/graemlins/thinking.gif

sears again (this isn't the one I have but its next on the list, I bought the cheapie $19.99 one from discount tool and I use the hell out of it)
more powerful and smaller by 1/2 the weight at just 6lbs! /forums/images/graemlins/thinking.gif Maybe I'll get this one instead

 

[ryoken]

my 18 volt cordless impact is invaluable for tearing motors apart out on the docks... /forums/images/graemlins/thumb.gif

my old boss had a chorded electric, big old mofo. quite unwieldy, but effective...

i use my IR air up in the shop.

 

[84_Chevy_K10]

2135TI, got mine on ebay brand new, $189

 

[beater_k20]

2135TI, i bought mine off the Mac truck for $300, but if it ever breaks, it gets fixed or replaced at no charge. IR has a 1year warranty, so i didnt get screwed as bad as it looks at first. after using Tim's, i had to have one.

 

[Polaris]

I have this kind: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=22664&item=4321952971&rd=1

I used a cheap Campbell-Hausfeld for a few years. There is no comparison between that and the Thunder Gun with it's 625# of torque. I bought mine used for $75 from the Matco guy /forums/images/graemlins/pimp1.gif

 

[chevyfumes]

I ended up getting this one I hope it doesn't suck too bad but there was no way I was getting the go ahead from the wife for anything moe expensive... /forums/images/graemlins/pimp1.gifHusky