Part from 3/4 ton 4x4 Chevy Pickup

[phreddei166]

phreddei, Here is a pic of the drivers side fill, passenger looks the same just reversed.

Thanks for pics, my bed looks different (more open ) at fuel fill pipe. It makes me think my bed is newer year.

 

[xissix]

I think I could use the wiring that goes to the wiper motor, if it's still there. Does it have a 4-wire plug and a 2-wire plug?

I just checked, it has two 2 wire plugs and a 3 wire plug. The wiper harness is part of the engine harness block, so I'd want to sell as a whole item, cut up harness not worth too much. .

 

[xissix]

Thanks for pics, my bed looks different (more open ) at fuel fill pipe. It makes me think my bed is newer year.

Could be, hope you figure it out!

 

[xissix]

Pics as requested

 

[kennyw]

Thanks for pics, my bed looks different (more open ) at fuel fill pipe. It makes me think my bed is newer year.

Newer beds used a plastic cup to hold the end of the hose in place.

 

[imiceman44]

How are the door panels and where in ID are you?

Just a note here:
I do a lot of travelling from CA to UT to ID and back so if you guys need any parts moved let me know, I would do free if I just have to meet off the highway, and maybe a few bucks if I have to put more time into it.

By the way I drive an 18 wheeler.

 

[xissix]

Cool, Thanks IceMan!

Things are starting to get a bit thin now, all body parts have been taken to the crusher, but they all went stripped so still have a bunch of misc stuff. Only items sold are the transferscase and associated pieces, and all the door hardware. Still have most all of the stuff in the pics above.

 

[xissix]

Final call on all the remaining parts and for all those that where interested in items pictued above. All goes to the wrecking yard on Sat...