CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Parting out 12 bolt rear with disc brakes

bp71k5

3/4 ton status
Joined
Mar 31, 2006
Posts
8,840
Reaction score
2,833
Location
Knoxville, TN 37922
I'm moving up to a 1 ton axle so the old one has to go. It's already got the TSM rear disc brake kit installed. The rotor's have about 2500 miles on them along with the new brake calipers and pads.

The gears are 3.07 and there's an oil leak at one of the tube plug welds on the pumpkin.

$75 obo. no shipping, but can help deliver in northern CA near San Jose. I can go as far south as Turlock and as far north as Sacremento.

The brakes are sold, but check post #4 for other parts.
 
Last edited:
What, no one wants the superb gas mileage 3.07 axles provide? ;)

I might be willing to separate if no one wants it whole. Realistically, not many people will want this except for the brake stuff so if no one takes it within a day or two, I'll separate them and take the axle to the scrap yard.

The ebrake is setup and working with the stock cables for a 71. The TSM kit has a little tube you tack weld to the brake bracket.

Here's some pictures. The calipers look really old because of the surface rust, but I bought them new about 2 years and 2500 miles ago. They work fine and don't leak.

rearend 002.jpg

rearend 003.jpg

rearend 004.jpg
 
12 bolt rear axle parting out

This axle is being parted now. Here's what available:

1. Rear disc brake conversion set. All the parts to convert your rear 12bolt axle to disc brakes (including the ebrake). - Brackets are TSM, the rotors are from Black Widow Performance and the calipers were remanufactured and purchased from a local parts store ~2 years ago. The braided stainless hoses are also included. - $85 shipped -SOLD

2. 1 pair of good used stock 12b axle shafts. - $60 shipped

3. Set of used axles bearings with about 2500 miles on them. Good for spares - $15 shipped

4. Brand new (still in package) Yukon Gear (PN# AK1559) rear axle bearings with seals - $40 shipped

5. ORD Ubolt reversal plates as shown here. (Used but great shape) - $25 shipped http://www.offroaddesign.com/catalog/uboltreversal.htm

5. Anything else on the axle - Free if you pick it up or I'll ship it to you for whatever the shipping cost comes to. Diff cover, spider gears, carrier, etc. All in good used condition.
 
Last edited:
Bump for the u-bolt reversal plates (and used ubolts, washers, and nuts) as well as the new bearings. All axles are pending sale, and whatever is left is going to the scrap yard.
 
Top Bottom