i want to part out my jimmy, and i'd like the motor and axles to go first.
427 BBC 30 over on the pistons, and 10/10 on the STEEL crank. i did the re-build myself, and have all receipts. very low mileage since the rebuild. the motor has an edelbrock performer intake and a Q-jet carb, a mild crane cam, and gm perf parts aluminum valve covers. heads were reconed at the time of the re-build. all machine work was done by Jimmy Allard in Ennis. i will include every bracket and accessory with the motor, making it ideal for a small block swap. you can hear it run if you are close to Ennis. SOLD!
the axles are a corp 10 and 12 bolt. ratio is .456 the front has a detroit ez locker, the rear has a full detroit. the gears and lockers were done at Lee's 4X4 in Carrolton, Tx every seal and bearing was replaced by Lee also. axles are sold!
the jimmy is a little rough in the looks dept. but is really solid where it counts.
other things are:
np203 rebuilt by me with a new wide chain and gears, and a superwinch part time kit, new seals and gaskets. t-case is sold!
4" all spring rough country/heckethorn lift with arm SOLD
rancho rs 9000 shocks for a 4" lift and rancho steering stabilizer SOLD
semi fresh gray vinyl buckets and rear seat 75.00 each on the buckets 125.00 for the rear NOW 60.00 each on the buckets, and 100.00 for the rear how about 50.00 each, front or rear!
gray tuffy security console with a stereo cutout 125.00 NOW 100.00 SOLD!
4x4 turbo 350 tranny
please let me know if my prices are out of line, or you are interested in the misc. stuff
i can also e-mail pictures of anything you might want.
btw, i'm new here, but have lots of feedback on the FALFILES under user name T2
thanks for looking...........................Neal
427 BBC 30 over on the pistons, and 10/10 on the STEEL crank. i did the re-build myself, and have all receipts. very low mileage since the rebuild. the motor has an edelbrock performer intake and a Q-jet carb, a mild crane cam, and gm perf parts aluminum valve covers. heads were reconed at the time of the re-build. all machine work was done by Jimmy Allard in Ennis. i will include every bracket and accessory with the motor, making it ideal for a small block swap. you can hear it run if you are close to Ennis. SOLD!
the axles are a corp 10 and 12 bolt. ratio is .456 the front has a detroit ez locker, the rear has a full detroit. the gears and lockers were done at Lee's 4X4 in Carrolton, Tx every seal and bearing was replaced by Lee also. axles are sold!
the jimmy is a little rough in the looks dept. but is really solid where it counts.
other things are:
np203 rebuilt by me with a new wide chain and gears, and a superwinch part time kit, new seals and gaskets. t-case is sold!
4" all spring rough country/heckethorn lift with arm SOLD
rancho rs 9000 shocks for a 4" lift and rancho steering stabilizer SOLD
semi fresh gray vinyl buckets and rear seat 75.00 each on the buckets 125.00 for the rear NOW 60.00 each on the buckets, and 100.00 for the rear how about 50.00 each, front or rear!
gray tuffy security console with a stereo cutout 125.00 NOW 100.00 SOLD!
4x4 turbo 350 tranny
please let me know if my prices are out of line, or you are interested in the misc. stuff
i can also e-mail pictures of anything you might want.
btw, i'm new here, but have lots of feedback on the FALFILES under user name T2
thanks for looking...........................Neal
Last edited:
