CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

parting out 85 Blazer (lots of pics)

Stratispho

1/2 ton status
Joined
Apr 26, 2005
Posts
106
Reaction score
0
Location
Mesa, AZ
I'm tired of it sitting so I'm getting rid of the whole thing. CHEAP... I'll drop em off if it's not too far for a nominal fee to cover gas.

driverdoor.jpg


4 of these wheels. 15 x 12.5's $50 for the set
wheel.jpg


4 35x15x12.5 tires... They've been sitting for 4 years now, so drive em at your own risk... $100 for all of them.
Big O tires and 1 33x15x12.5 Hercules and 1 35x15x12.5 dunlop
treaddepthhercules.jpg

tirewithwheel2.jpg


4" custom bumper, heavy as hell - $20
bumper.jpg


left and right doors in good condition with only a few dings..
driverdoorinterior.jpg


I am getting rid of everything but the motor and tranny and it was a complete vehicle I'm just too lazy to post pics right now but I also have...

A hardtop for this 85 in good condition but needs the glass on the drivers side.
A tailgate with unbroken glass. not sure if motor works.
The hood,
All other body panels,
And a front clip from a pre 83 - Free to whoever will haul it off.
 
Sorry to hear that your giving up on the project.... Can I get pic's of the pre 83 front clip? I'll take it if it's in good shape.... How mcuh for the rear tailgate? Do you have key for it?
 
I have pics. i don't have them hosted yet. I'll do it sometime this weekend. And it's the tailgate you've seen but I do not have the keys for it.
 
How is the frame? Is there any frame damage or cracks in the frame? also how is just the tub like floor rust? What price range are you looking to get out of this?
 
Frame is cracked right behind the front motor mounts on both side. That's why I'm getting rid of everything. The whole body is in really good shape except for the right side rocker panel has some rust. The rest is all surface rust because I stripped out the interior thinking I would put in some bedliner.

And for price. Do you want just the tub or the whold body? I have someone interested in the front clip so it would be from the A - pillar's back. And Cmoe has called dibs on the tailgate...
 
I'll take 1 or 2 of the 35's off your hands...could use a couple of spares.
 
there's a set of 4 and one 35" Dunlop and one 33" Hercules... the set of 4 is $100 if you come and pick them up. And I have 2 sets of 15x12.4 Wheels also.

Each set $100. See pics above.

The 2 odd tires someone can have. Just come pick em up. Send me a Pm if you want my phone number
 
Here's a pic of the pre 83 front clip

IMG_0372.jpg


IMG_0371.jpg


there is a matching hood and it has the stock radiator mounts. I haven't checked but I think the stock radiator is still there also
 
Someone else pm'd me about taking the tub to if they want just the tub I'll chop off the quarter panels. Depends on that though. I'll get back to you on price depending on how much time it takes me to remove em...
 
What do you want for the tailgate? Does the motor work and do you have the switch and power wires that run up to the front of the cab?
 
Cmoe said:
What do you want for the tailgate? Does the motor work and do you have the switch and power wires that run up to the front of the cab?

Unknown if motor works.. And I have the switch and the power wires but they are still attached to the truck. Should be an easy remove.

$75 if you'll take the wires and the switch. I just don't have time to do much. And I had keys so If I find the one that fits the ignition you can have it after I make a copy.
 
Man that's out of my price range for an un-known condition of a power window... It would be the same key as the doors, not the ignition.... good luck....
 
Inner Fenders??

How are the front inner fenders? My are rotted though. How much shipped to 78626 Georgetown, TX Thanks
 
Passenger is identical to the driver. I cannot currently find the keys... If you want em without the keys let me know.
 
Top Bottom