Parting out 85 k5 1 tons, DIY4x stuff, ect ect

[mp1472]

Got bit by the corporate bean counters today so now that im jobless ive got to get rid of my project there is lots of new never used stuff here as well

I got laid off and recieved my k5 back from the sandblaster on the same day ! i never have cracked these open i have no idea what the gear ratios are only that i could say i have 39" tires and goin round 65 on the highway on a th400 i was about 4k rpm


d 60 front with ord x over steering $1350

corp 14bff has an eaton posi in it $500

remember these axles are under a blazer and have the disc brake conversion already done they are freshly sandblasted in virtually brand new condition and will be ready to go
i have Diy 4x Ubolts and spring plates and ez inch for this one theres 150 right there



Engine

350 chevy 3000 miles on it edelbrock carb and intake newly rebuilt 130 amp alt brand new starter had a recipt from the dealer for 2300 but lost it when i took it to work to get info bout the motor .. so all i know is its a crate motor i dont know hp compression ratio ect ect
felt pretty healthy im selling it with carb and all accesories attached

$750

th400 tranny has about 18k miles on it

$350

np205 x case 18k miles

$200

custom cv joint driveshafts truck has 8 in lift i have a recipt for 2200 on these from the previous owner i believe its from arizona driveline ill have to find the recipt

$500 pair

*brand new inner fenders

$ 40 each

*brand new fenders both sides
$90 each

*brand new dpi rock sliders
http://dpalms.com/dpi/images/TrailRider.htm

$175

*brand new: interior carpet kit dark charcoal color
$125

*brand new: 4 bilstein 5150 (BF5-A198-H1) 14.53 travel 255/70 valving
$75 each
http://www.bilstein.com/offroad_5150.php

(SOLD)*brand new cast ford shock towers (SOLD)
$ 30 bucks
(SOLD)*brand new ord weld in frame repair and brace(SOLD)
$100 bucks
(SOLD)*brand new DIY4x shackle flip ( sand blasted )(SOLD)
$100

(SOLD!)*brand new diy 4x inboard shock kit ( sand blasted) (SOLD!)
$100
*brand new d 60 and corp 14bff ruff stuff 3/8" diff covers http://www.ruffstuffspecialties.com....html?osCsid=924ef97aae31729524cf86078df2a5b2

$ 60 EACH (14bff COVER GONE D60 STILL LEFT)
15 x 12 steelies with 38.5 x 15 x 15 thorn turds on em bout 50% tread 150 OMG CHEAP

*brand new (never been on the truck) 5 diamo 17k 18" x 10 with 38 x 15.5 x 18 toyo open country mt's $2300 paid 3350 for em

*brand new bds 4 inch lift rear springs 52" $250

(SOLD)Tach oil and water autometer sport comp gauges $50 (SOLD)

*Brand new Power window kit from
http://electric-life.com/shopexd.asp?id=918 fitment

73-77 BLAZER FULL SIZE FRONT DOOR (USE WITH 78 AND LATER WINDOW SASH)
78-91 BLAZER K-5 FULL SIZE FRONT DOOR
73-77 PICKUP FRONT DOOR(USE WITH 78 AND LATER WINDOW SASH)
78-87 PICKUP FULL SIZE, C, K, R, V FRONT DOOR 78-91 SUBURBAN FULL SIZE FRONT DOOR

$175 inc wiring harness which u have to buy seprately new


ok im getting tired theses more stuff like the super lift front and rear springs 8" freshly sand blasted, doors , hood , cab , wiring harnesses got an blower shroud w/o a/c and one with a/c and anything else you may think of lemme know

if you want to take over the project or buy the freshly blasted chassis with the axles and 8 inch lift already done we can talk bout that as well

paul 720-940-8268 cell im up till 12 easily every night dont be shy ... you can also text me this is my cell !

also you can pay with paypal or money order or certified check

 

[jamber2541]

intrested in this, sent you a p.m.
brand new diy 4x inboard shock kit ( sand blasted)

 

[odin]

pm sent for gauges and Bilsteins.

 

[dleroy43]

interested in the diy rear flip. Do you have the shackles for it?

 

[mp1472]

interested in the diy rear flip. Do you have the shackles for it?

yes i believe i got the 7 " shackles ill verify that today .. oh i did rattlecan the shackles black but the flip is sand blasted

 

[clarkjw24]

also interested in the bilstiens and guages.

 

[mp1472]

added some new pics i found drive shaft, fenders , diy stuff

 

[royjones]

intrested in this, sent you a p.m.
brand new diy 4x inboard shock kit ( sand blasted)

let me know if jamber passes. but would this work on a 76 frame

 

[mp1472]

let me know if jamber passes. but would this work on a 76 frame

Inboard kit is sold but i believe it wouldnt work for a 76

 

[BGKYK5]

Sorry to hear about your job. I may be interested in:

Bolt-on ORD steering brace
Gauges
Cross-over steering parts if you are willing to part them out separately

 

[mp1472]

couple ppl interested in the brace and weld in as a set which id prefer to sell that way im hoping to off the d60 like it is however if enough time goes by maybe id part it out gauges may be sold still up for grabs now though

 

[BGKYK5]

Let me know.....

 

[mp1472]

looks like so far diff covers , shocks , diy flip diy shock invert, weld in frame brace, sold

 

[BGKYK5]

So the bolt in brace is available? ......

 

[mp1472]

to everyone thats interested in the driveshafts i will snap some pics and post em in the next couple hours im headin to the post office to ship out the stuff thats been purchased so far thanks everyone!

 

[twoslo4five0]

interested in the shocks if anyone bails out..i got the money also

 

[mp1472]

pics of the drive shafts

heres the pics of the driveshafts they are from arizona drivelines and set up for np205 , dana 60 and corp 14bff axles they are in great shape and were on my blazer which had an 8 inch lift there are 2 recipts from the previous owner one for 1840 one for 460 so recipts in total 2300 no idea how it breaks out cause its just cc recipts but these are a steal !!!!

 

[twoslo4five0]

thoose are crazy driveshafts...you got a pic of the flange at the axle??

 

[mp1472]

thoose are crazy driveshafts...you got a pic of the flange at the axle??

check my first post i updated the pics of the axles u should be able to see the flange