What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Parting out '89 Blazer and other random stuff in KY

BGKYK5

BGKYK5

3/4 ton status
GMOTM Winner
Joined
Nov 1, 2006
Posts
5,931
Reaction score
10
Location
on the crapper...
Parting out a stock '89 Blazer. It was running two days ago when I pulled it off the road to steal the tranny out of it. It is complete minus the tranny, driveshafts, and a few other misc parts. The tub and bed are rusted out and the interior is a little rough, but otherwise it is in OK shape. It has ten bolts front and rear, a 350 TBI engine and a '89-only 241 with mechanical speedo.

Also selling:

New in Box Harbor Freight 5000lb tow bar - $40. See it here.

New in Box Harbor Freight magnetic trailer lights - $20. See 'em here.

Used 14BFF 3.21 gear set - $30

Used 14BFF drums and backing plates - $25

Used D60 4.10 gear set - $50

Used D60 open carrier (4.10 and down) - $50

Used 600CFM Cater AFB carb with tuning/rebuild book. - $150 Ran fine when I pulled it but has been siting for 7 years (this is the same as the new Edelbrock carbs - I have heard that in certain situations, the bowl placement on the sides makes this a better off-road carb than a standard Holley)

Bad 700R4 from a '91 Blazer. Usable as a core. Offers?

Also entertaining offers on my rpmshop.com domain name (no current content or traffic)

All prices are OBO and don't include shipping, if you think a price is out of line lemme know what you want to pay and we can talk. Parts are located in Bowling Green KY. Post up or PM for pics. Wanna trade? This is the stuff I am looking for.

The gray one is the one I am parting out.

P1010045.JPG

P1010045.JPG
 
Last edited:
how much for the the wiring harness for the headlights and marker lights that unplugs from fire wall and how much for the motor
 
how much for the entire radiator support with grille, headlights and all trim still attached with headlight harness.
 
BGKYK5 said:
Blue-Gray
Click to expand...

I take it they are not the standard gray? Do you have any pics of them for color reference? Also, what are you wanting for the front belt assemblies (assuming they're what i'm looking for)?
 
You can sort of see the seat belts in this pic:

P1010048.JPG

Bear with me guys, I don't part stuff out very often, so I gotta do some research to come up with fair prices.

P1010048.JPG
 
Ok, so when you figure out what you want for the seat belts (really only need driver side) let me know. Also how about all the chrome plastic covers for the door pull handles? Please see about shipping also to 94538 business addy.
 
hows the dash and door panels?, how much? how much for the headlamp bezels?
 
The driver's side headlight bezel is cracked, but the passenger side is OK. The door panels look a little better in the pics than in real life. I'll try to post a better pic of the dash.

DSCN3199.JPG

DSCN3200.JPG

DSCN3203.JPG

DSCN3204.JPG

DSCN3199.JPG

DSCN3200.JPG

DSCN3203.JPG

DSCN3204.JPG
 
You know the weather strip in the door where you rest your arm when driving? How much for those 4 pieces?
 
Dafey said:
You know the weather strip in the door where you rest your arm when driving? How much for those 4 pieces?
Click to expand...

Those are called window felts and those are cheap enough to buy them new. They are sometimes hard to remove without bending them all up if you don't know what you're doing or aren't careful enough.
 
Price on the gauge cluster (if it has the plug on the speedo for VSS) shipped to 40222 (Louisville)?

Thanks.
 
Updates:

4x4High, how does $40 plus shipping sound for both front belts? They are complete minus one plastic trim piece at the top of the driver's side belt. I'll try to post up better pics of the belts in the next couple days. I only have the chrome parts for one of the doors, If the doors don't sell, I'll let you know.

Duntz, I'd rather sell the front clip complete if possible. If there are no buyers within a week, I'll break it up. Are you looking for a price of just the engine or the engine plus all the TBI stuff?

35DP, Check out the top pic of the headlight bezel. Note the crack. It continues through the grill all the way to the bowtie in the middle. Still interested?

Johnny Chimpo, we'll work out some kind of trade. I'll send you a PM with more questions today.

Muddybuddy, the dash has several cracks, one of the headlight bezels is cracked, and you can see the inner door panels in a previous pic. What are you still interested in?

Dafey, I'd rather sell the doors complete. If you really want my felt pieces and there are no takers for the doors, I could get you a price, but I bet shipping kills the deal.

Bizee, it has a mechanical speedo.


I need to get rid of this truck in the next month or two, so while I would like to sell the big parts as complete as possible, If buyers aren't forthcomming, I'll sell the small stuff and scrap the rest. I hate to say this or that is busted and give you the wrong idea that all the parts are junk, but I want to be clear about the condition of everything so there are no suprises for anybody. BTW the doors are power window and power lock.
 
just need the motor, let me know if decide to part with the headlight harness
 
I would take the sun visors if they are grey. Thats what they look like it the photo's. Thanks shipped to 81144 Also how about the rear side windows? Do they have the vent wings?
 
Last edited:
Dafey, I'd rather sell the doors complete. If you really want my felt pieces and there are no takers for the doors, I could get you a price, but I bet shipping kills the deal.
Click to expand...
Ok let me know later.LMC is cheapest at just over $100.
 
You must log in or register to reply here.

Latest Posts

Top Bottom