Parts for sale - need to fund my Emmett resurrection project....

[Emmettology 101]

Ok, I have some parts laying aroudn that I am going to sell so I can raise $ to fund my Emmett resurrection project.....


Here's what I have:

TPI computer - from 90-92 Vette - weather tight for mounting under hood and is for Speed Desnity.. Just comp and wiring plug. - $50

14FF gears - 4.10 ratio - $50

complete 14FF - drum to drum with ebrake cables and 3.73 gears - has correct perch width for K5's - $50

Tan rear back viynl seat from 82 K5 - $10

10 bolt front axle shafts - short and long inner and stubs - $40

10 bolt front housing and knuckles - $10

White 76-91 topper - good shape, has non-sliding deep tinited windows - $free

(3) 35x12.50x15 BFG AT's - good for spares - $10ea.

(4) stock sized tires and wheels(16") for 88+ IFS truck - 6 lug - $80 tires have excellent tread and have beauty rings also!

Stock D60 stub - got it off ebay, looks good - $20

Pontiac 400 and turbo 400 from 77 GP - FREE

Toyota Project - 1991 Reg cab shortbed 4x4 - new head and bottom end(22re)!!!!!!! ???????

HP Movie Writer 4000 - external DVD burner - can hook a VHS, camcorder or ?? into it to burn your fav movies to DVD - only used 3 times for burning music CD's - $250






All Located in Masury, OH. Buyer pays shipping, will ship the smaller stuff.

May add more, check back often!!!

 

[fourwheelerjeff]

[ QUOTE ]
complete 14FF - drum to drum with ebrake cables and 3.73 gears - has correct perch width for K5's - $50

[/ QUOTE ]

why can't you be closer /forums/images/graemlins/frown.gif

 

[Emmettology 101]

Come on Fred, make a trip to good old Ohio!! LOL If you find someone close by making a trip your way, maybe we can work something out!

 

[darkshadow]

boss might want Pontiac 400 and turbo 400,
what shape is it in?
if he comes and gets it i will take the 14ff, ill let you know!! /forums/images/graemlins/waytogo.gif

 

[Emmettology 101]

The 400's are from our old 77 GP that was wrecked.. They have about 77K miles on them and worked fine when pulled. The engine has been partially disassembled and is missing bolts, but the complete bottom end is there and so are the heads... It does have oil sludge in the top of the heads, but ran fine.... Will need rebuilt. I think they are 4x heads, if memory serves me.....

 

[Emmettology 101]

And the TPI computer is a 727

 

[darkshadow]

sorry no go not worth enuff to him to drive all the way there, how far are you from canada?

 

[Emmettology 101]

I think it is about a 3 hour drive from Buffalo...

 

[darkshadow]

interesting /forums/images/graemlins/thinking.gif /forums/images/graemlins/thinking.gif /forums/images/graemlins/thinking.gif

mabey he will want mabey.....

wouldent mind the ff. well see /forums/images/graemlins/thumb.gif

 

[beater_k20]

does the 400/400 run? by any chance have the head casting numbers off of the pontiac heads? should be a 2 or 3 digit code over the center two exhaust ports, in plain sight. if your numbers are right, my buddy and i may take a little trip and take it off your hands.

 

[Emmettology 101]

The heads are off the engine right now and there is no intake or disty..... But it ran good when pulled. And if memory serves me, the heads are 4x heads. I will double check though.

 

[beater_k20]

still got the 400/400? me and two of my buddies are looking for a reason to take a weekend road trip to Ohio. /forums/images/graemlins/grin.gif where in OH are you?

 

[Emmettology 101]

Yes, I still have it. /forums/images/graemlins/thumb.gif