Parts from an 86 ::updated::

[Confedneck]

Got an 86 K10 scottsdale with some parts in florida, trades accepted.... you arrange shipping or pickup from 33905 area code here goes:
none of the parts are 100% mint,and no guarantees on anything mechanical as we do not know actual condition, if you want pictures, just PM me or CHEVY4WD(its his truck) with requests, we have to go take some, but we will have them shortly.If prices are too high, PM me with an offer and i'll get back to you..stuff NEEDS to go...
Frame-75$
Rear Spring Hangers and Shackles-30$
Cab-75$
Hood-50$
Doors-60$ for the pair with mirrors, 50$ without
Bed-50$
Tailgate-20$
Fenders-20$ for both
Door Glass for Passengers door only-10$
Mirrors-10$ for the pair
Windshield and Rear Slider-40$ a piece
Door Panels-faded tan, custom deluxe-no arm rests-15$ each
NP208 Shifter-handle and floor plate-20$
4-16.5" wagon wheels with 2 38.5 ground hawgs-40$
Small Block A/C condensor-15$
P/S pump and resevoir-15$
P/S Gear-20$
10 bolt front Diff cover-20$
K5 (i think, it's pretty square) gas tank-15$
Longbed Tank-15$
Dash-complete with ashtray, glove box-50$
Gauges-and trim-20$
Steering Column-CustomDeluxe w/ wheel and cylinder/keys-non tilt 4 spd-30$
Steering Shaft-15$
Core Support-single headlamp-25$
3 Pedal Setup-20$
Front Chrome Bumper-pretty nice-50$
Rear Bumper-not chrome, step bumper-30$
14 Bolt Rear Drums-15$ for the pair, can be machined for no extra charge if you wish
Headlight Trim for single lamps-10$ for the pair
Alternator-10$
Grille-20$, needs paint and a bowtie-GONE
208 Crossmember-20$
Can seperate manual regulators from doors if requested..

have pictures of almost everything now

again, nothing is 100% mint and no guarantee on mechanical parts, pm me or CHEVY4WD for more info or to make an offer...

/forums/images/graemlins/deal.gif::pen for trades for a good 14bff OPEN carrier::: /forums/images/graemlins/deal.gif PM CHEVY4WD for any trade offers...

 

[DOCKAWI650]

Re: Parts from an 86

does the steering column have cruise control, wiper control, etc.?? also, what color is the dash?

 

[Confedneck]

Re: Parts from an 86

its a custom deluxe, but whatever was available on it is there, i dont think it has cruise... its a 4 spd truck so no gear shifter on the column..i believe the dash is dark brown...ill have to check for sure on the cruise when i can get out to look at it, its not here, at someone elses place...

 

[Confedneck]

top...

 

[Jeremy_C]

Pics of truck to ##[email protected] just take off the ##__

/forums/images/graemlins/thumb.gif

 

[Confedneck]

you got mail...

 

[Confedneck]

ttt, anyone need any of this stuff?

 

[Confedneck]

it's all still sitting there... anybody need ANYTHING?

 

[ShitownK5er]

sent you a pm bout the fenders

cody

 

[Bone85K5]

Any pics of the tailgate? What kind of shape is it in? ANy rust or dents?

Do you have a hardtop for sale??

PS I am in GA so i can pick up

 

[JaymzLD]

Do you have the transmission for sale? You said it was a manual right? How muich would you sell it for? Is it in good shape (good enough to last until I have enough money to fix it)? Thanks

 

[Confedneck]

have the tailgate... no trans though... and its a truck, so no hardtop unless you want the roof...

only one dent from what i can tell there and its along the top, and im pretty sure the inside of it is not perfect at all..

 

[Wingnutt]

Do you still have the instrument cluster? I'm looking for one in decent shape to do a gage swap.

 

[Confedneck]

wing, still have the cluster.. are you interested in the whole thing? ie gauges and bezel? or...?

 

[Confedneck]

bump bump bumpety bump

 

[Wingnutt]

Just the instrument cluster. I'm looking for one to attempt an afteramrket gage install, so it doesn't matter if the gages work or not.

 

[Confedneck]

yes i still have it... pm me if youd like and we'll set something up

 

[77 Mud Buddy]

pm'ed ya about the power steering pump and pulley!

 

[OL14BLAZ]

PM sent on the tailgate.



Eric

 

[Confedneck]

PM's returned... thanks guys..