mudman2882
1/2 ton status
I am looking for a passenger drop 205. Would like round pattern but would consider figure 8 as well. Would be great to be in Texas or at least close to Lubbock TX. Shipping would be very $$$. Thanks.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
pass drop 205
- Thread starter mudman2882
- Start date
badboycrawler
Registered Member
what trans are u running
I think the round pattern NP205 only showed up on the TH400 and 32 spline SM465.
mudman2882
1/2 ton status
I am running a 700r4 but I a doing a doubler. I was looking for a round pattern to put it behind a 231 range box but if I can't find one I will take a figure 8 and do a 203 range box. Not sure if the 231 would work anyway.
Jimbo*
1/2 ton status
I've got a 32 spline round pattern from an 86 K30, slip yoke rear. $300
Can meet you in Plains.
Jimbo
Can meet you in Plains.
Jimbo
mudman2882
1/2 ton status
is the input the long or short
if its from an '86 i believe its going to be long input. pretty sure '85 was the last year for short input
Jimbo*
1/2 ton status
Muddy's right, long input.
Jimbo
Jimbo
mudman2882
1/2 ton status
well I think $300 is a bit high because I would still have to swap the input shaft and do a slip yoke eliminator. My budget is not quite that large. May have to keep looking. I will keep you in mind.
Jimbo*
1/2 ton status
I hear you. Might be better off to build a figure eight, as the round pattern cases are too hard to come by.
Jimbo
Jimbo
mudman2882
1/2 ton status
I was trying to find one to put behind a 231 range box but I'm not sure if that will even work. Might be better to spend less on a figure 8 and a little more on the doubler adapter. Thanks
I have either one, and neither have the slip yoke, both with 1350 bolt on style yoke. One is an 81, which is the figure 8 style, and the other is a 90, 6 bolt round pattern. Dunno much about the 81, but the 90 shifts really smooth, and worked fine. Can do $250 each with adaptor.
mudman2882
1/2 ton status
what about shipping? any idea?
do either have 32 spline input?
do either have 32 spline input?
They both have the 32 spline input, both off TH400s. I can ship, guessing they weigh 150# or so each. My zip is 13904, bussiness address.
mudman2882
1/2 ton status
is the figure 8 the short input? what about the round? have you used any good shipping company?
I can never remember what style is what input!!! But one is short and one is long, if that helps any. lol. I use frieghtquote.com, they find the cheapest shipper that is in your area.
with a small crate it will be about 200lbs.
mudman2882
1/2 ton status
Thanks for the offer but with shipping it will be pushing my budget. But with the short 32 spline it would save me having to swap inputs. l will keep it in mind.
Anyone within driving distance? Still looking.
Anyone within driving distance? Still looking.
mudman2882
1/2 ton status
ttt
still looking
still looking
ive got one, ive found a truck thats already got a 205 so i dont need it any more. its a chevy round pattern with 31spline ford input (works for doubler). theres something weird with the shifters (i was going to rebuild it and twin stick it anyways). id like to get $200 obo for it + shipping. im in VA. let me know
