pic request-uncentered h1s

[twoslo4five0]

looking for pics of uncentered h1s with a drw front and spacers on the rear on a 14 bolt....actually any pics of uncentered h1s mouneted up on the truck with a description of what you are running (spacers,drw,van axle,ect) would be great

 

[NorCalKid]

Here is mine 12bolt h1's with 38.5x15" tsl's. DRW 60 and 2.5" spacer on the 14 bolt

 

[Pvt. Maggot]

Don't mean the hi-jack, but do you need spacers with a van 14bff?

 

[muddybuddy]

pics are in my thread. uncentered h1's srwd60/14b 2" spacers up front, 2.5" in rear.

if u need more pics let me know, ill shoot them before i go to work

 

[readymix]

Here is a stock HMMWV rim on a SRW 14FF with a 2" spacer

I don't have the DRW hubs on my 60 but the 2" spacers on the SRW hubs work great.

 

[atho]

Here is a stock HMMWV rim on a SRW 14FF with a 2" spacer


I don't have the DRW hubs on my 60 but the 2" spacers on the SRW hubs work great.

If I may ask, where did you get your spacers from?

 

[RGV72BLAZER]

Here's mine, DRW 60, 12" wide H1s on 44s:

rear isn't a SRW axle.

 

[twoslo4five0]

whats the measurement from the outside edge of the tire to the other outside edge??can you get it for me if you dont have it..

 

[readymix]

If I may ask, where did you get your spacers from?

Offroad Overstock

 

[RGV72BLAZER]

mine's exactly 8'.

 

[6.2Blazer]

Don't mean the hi-jack, but do you need spacers with a van 14bff?

A van 14FF is about the same width of a regular SRW D60, while most non-van 14FF's are 3" narrower. You probably don't need a spacer to bolt them on, but that is going to make the rear much narrower than the front...probably around 4-8" narrower depending on what method you use on the front (spacers, DRW hubs, etc..).