stallion85
1/2 ton status
Should there be any play in the yoke on my D44? If grabbed a hold of it will move up and down and side to side ever so slightly. The 14ff doesn't move????
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Play in yoke on D44
- Thread starter stallion85
- Start date
big83chevy4x4
3/4 ton status
time for some pinion bearings.
stallion85
1/2 ton status
The ring and pinion was just changed out with a new pinion bearing also. It kind of feels like it's just not in there very tigh??
big83chevy4x4
3/4 ton status
is the pinion moving in the housing or the yoke moving on the pinion?
stallion85
1/2 ton status
Pinion in the housing... /forums/images/graemlins/frown.gif
stallion85
1/2 ton status
[ QUOTE ]
The bearings are bad or the preload is wrong.
[/ QUOTE ]
How would I fix the pre-load. Is the lock nut on the pinion not tight enough?
The bearings are bad or the preload is wrong.
[/ QUOTE ]
How would I fix the pre-load. Is the lock nut on the pinion not tight enough?
