What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Playing on beach at Hatteras vid

BDAMNRZ

BDAMNRZ

1/2 ton status
Joined
Aug 9, 2006
Posts
124
Reaction score
0
Location
Chesterfield, VA
The truck did awesome on the sand. Let out no air pressure, and road around all week in 2wd. Others were getting stuck in 4wd near the exits off the beach. Pulled out a couple of other guys but did not have the camera with me. The fisrt run was in 4lo and let the tranny shift on its own. The second was 4lo and I shifted it. I should have done a couple in high too. I wanted to shock the front shaft a couple of times to get the scare of it breaking out of me.http://www.youtube.com/bdmanrz1
 
Sweet.............especially the sounds!!! :bow: :bow:

Might be a bunch of us Chebbie drivers going there in August............:wink1:
 
Thanks for the compliments guys. I'm going to have in a trasctor pull or two within the next couple of months (hopefully). I will get some more vids of ot soon. I dont do ant hardcore wheelin with it. Just screwing around and doing what I can without bending it up,,, (too bad)!!!!!!!
 
very cool stuff, i cant wait to get out on the beach for a camping trip with some friends. what lift and tire combo are you runnin???? that truck looks mean with that stance.
 
sweet! I always love seeing other guys that play in the sand...

I'll definately get a movie of mine when we go in a couple weeks, it looks like a mini-version of your truck.
 
lol, its true...he's running 400+ cid, I'm running 350, he's running 10", I'm running 8", he's running 39's, I'm running 37's, I've got 4.10's, he's got 4.88's and lockers....but they look pretty much identical :)
 
Avery4jc said:
lol, its true...he's running 400+ cid, I'm running 350, he's running 10", I'm running 8", he's running 39's, I'm running 37's, I've got 4.10's, he's got 4.88's and lockers....but they look pretty much identical :)
Click to expand...
ummm thoose are 38.5...lucky 4 me that truck is about 10 mins from were is sit right now..
 
shall we argue 1/2"? I round up ;)








so what are you running engine wise? It says a 406...
 
Avery4jc said:
shall we argue 1/2"? I round up ;)








so what are you running engine wise? It says a 406...
Click to expand...
what motor am i running???a bone stock 350..yeah he has a built 406...i just wanted to give you a hard time about the 1/2 inch lol..
 
BDAMNRZ said:
The truck did awesome on the sand. Let out no air pressure, and road around all week in 2wd. Others were getting stuck in 4wd near the exits off the beach. Pulled out a couple of other guys but did not have the camera with me. The fisrt run was in 4lo and let the tranny shift on its own. The second was 4lo and I shifted it. I should have done a couple in high too. I wanted to shock the front shaft a couple of times to get the scare of it breaking out of me.http://www.youtube.com/bdmanrz1
Click to expand...

BDAMNRZ: Nice rig, sounds great. You just may have the answer I'm looking for (searched for months now): Just got my 14bff sitting in garage waiting to clean it up etc. I've got 5 real nice MT Classic II's in 15X10 6 lug but can't for the life of me find any place that sells a 15X10 or 12 in 8 lug wheels like our MT II's or even another brand like an Eagle Alloy. Where did you get your 8 lugs that have bling to them rather than steel wagon wheels? How much $$$, if you don't mind me asking? Any info would be very helpful.
Hoby
 
twoslo4five0 said:
what motor am i running???a bone stock 350..yeah he has a built 406...i just wanted to give you a hard time about the 1/2 inch lol..
Click to expand...

haha yeah I know :wink1:

oh and the engine question was pointed towards him...what is a 406? a 400 bored over a little...like .030?
 
Big Blzn said:
BDAMNRZ: Nice rig, sounds great. You just may have the answer I'm looking for (searched for months now): Just got my 14bff sitting in garage waiting to clean it up etc. I've got 5 real nice MT Classic II's in 15X10 6 lug but can't for the life of me find any place that sells a 15X10 or 12 in 8 lug wheels like our MT II's or even another brand like an Eagle Alloy. Where did you get your 8 lugs that have bling to them rather than steel wagon wheels? How much $$$, if you don't mind me asking? Any info would be very helpful.
Hoby
Click to expand...
his wheels a classic 2's but 16.5's...
 
twoslo4five0 said:
his wheels a classic 2's but 16.5's...
Click to expand...

Saw that also but here is his sig profile below, so what gives??? With these rims are they maybe 15" and 16.5 wide? Or am I being ignant?!?!?!?!?


The truck did awesome on the sand. Let out no air pressure, and road around all week in 2wd. Others were getting stuck in 4wd near the exits off the beach. Pulled out a couple of other guys but did not have the camera with me. The fisrt run was in 4lo and let the tranny shift on its own. The second was 4lo and I shifted it. I should have done a couple in high too. I wanted to shock the front shaft a couple of times to get the scare of it breaking out of me.http://www.youtube.com/bdmanrz1
__________________
79 shortbed
10" susp. 38.5-15-16.5 Boggers 15x12 MT2's
stout 406
14ff 4.88 detroit
d44 4.88 lockright (yeah I know)
worked th350 2200 stall
np205
custom shafts
 
Sorry about the profile. That is a fu^&%$k up. They are in fact 16.5x12 MT II's. I'll change that. I got them from National Tire and Wheel in Wheeling, WV. Drove all the way there and picked them up, mounted and balanced. That was two years ago and the receipt is long gone. I want to say around $160.00 per wheel. That may be off, but I don't remember them being too pricey. And the 406ci is a stock 400 taken 30 over. One can be made with a 350 crank and the rods to match. Or you can do what I did and take the 400 30 over find the rod you want (mine are 5.7") and get a crank with the appropriate stroke to match your final deck height and given head comb. I'm running an EAGLE crank that has a stroke designed to use a 5.7" rod. With a flat top piston, and a 64cc chamber, leaves me at about 11:1 comp. Here's the rest. Ported double humps 2.02/1.60 stainless valves. Studs and guide plates.Comp 292h cam (hyd. 244dur. @.500/501 lift. 1.5 Roller RockersEdelbrock Performer RPM Air Gap. Holley 670 Double Pumber (it sucks, and it's way too small) MSD 6A, HEI distr., 22* initial timing, 34* total all in by 2500rpm ACCELL Coil, ACCELL 8.8 wires and one really ugly set of too small headers!:thumb: :usaflag:
 
Last edited:
Damn! Damn! Damn! I am at my whits-end trying to find something like a Classic II wheel that is polished in 15X10 or 12 in 8 lug. I don't like all that rock crawler crap in steel or even cheapie chrome spokes. Any ideas fellas. I almost don't want to put my 14bff in if I can't find a wheel like this. My 35" BFG's are only about 3 months old and I don't want to buy new ones.
Hoby
 
brag brag...just remember i showed that dirt pile in your back yard wuz up....j/k man your truck is the shiznit for sure:bow:...i just cant be around it to long it makes me dizzy with all the shines and the race gas fumes:eek1:..
 
You must log in or register to reply here.

Latest Posts

Top Bottom