Chrisblazzer89
1/2 ton status
Please delete!!!
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Please delete
- Thread starter Chrisblazzer89
- Start date
bigblazer87
1/2 ton status
It's the RH flat top knuckle that you need for crossover. And yes, a D44 knuckle will work on a 10 bolt. I'll be using this one for my crossover set up: http://www.aa-fab.com/item-D44001CR.html
Chrisblazzer89
1/2 ton status
Oh lol
Hossbaby50
3/4 ton status
When you buy knuckles buy a matched pair from a disc brake axle. You want a matched pair because the tierod on non-flattop knuckles mounts from the bottom and tierods for flattops mount from the top. Therefore if you one swap one knuckle and you want lowsteer crossover (which I recommend) your tierod won't bolt in.
Even if you deside to do highsteer I still recommend getting a matched pair. Swap new balljoints in the new pair now and when you do crossover you don't have to try and replace balljoints then. Also if you run histeer and break some steering arm bolts you could install a stock tierod to help get you home.
Harley
Even if you deside to do highsteer I still recommend getting a matched pair. Swap new balljoints in the new pair now and when you do crossover you don't have to try and replace balljoints then. Also if you run histeer and break some steering arm bolts you could install a stock tierod to help get you home.
Harley
Chrisblazzer89
1/2 ton status
Nvm Im gonna wait till i get a DANA 60 then i will go cross over.
