Please help

[blazinzuk]

Hey guys I am working on a Dodge ramcharger that needs to have a raised steering block put on it (d44 front) the setup is pretty much like a chevy but we cannot get the steering arm off. The freinds I was working with decided it was a good idea to try to torch out the cone washers(we have a new steering arm) so at least one of the studs is screwed up. No matter what we have done it will not move. I need suggestions any and all welcome Thanks

 

[unclematty]

At the risk of sounding like an arrogant ass, I have'nt found anything I can't get apart with a BFH and a torch, whats going on downthere??

 

[unclematty]

I always hit the piece with the hole in it, weather it's a steering knuckle, or an A-frame. which ever peice has something going through it needs to have the hell vibrated out of it! sometimes it calls for an air hammer and a pickle fork attachment.

 

[blazinzuk]

Yah we are going to try the pickle fork air hammer method tommorow I don't have an air hammer, I can get anything apart with a torch and BFH too, its just that putting it back together thing that gets me