Police Door/A-pillar lights

[cheyennek20]

Does anyone know if a company makes or someone has the Police spotlights for trucks or K5's. I'd put up a pic but I can't seem to find just the right one. Think.....The K5 from Jaws.

 

[speed_deed]

Good question

 

[77crewcab]

I've been thinking about this too. I have access to a 89 Caprice cop car with the spot lights on both sides. Thinking about taking them off and trying to fit them to the Blazer.

 

[DR]

http://www.galls.com/style.html?assort=general_catalog&style=SL061

They are a little pricey, but this should be what your looking for. according to this,
http://www.galls.com/sl061.html

It fits a K5..

 

[cheyennek20]

DR, You know of anyone that's installed them? ...and Door mount or A-pillar mount?

 

[mcwright]

I've seen them installed on some of the old police blazers here in Idaho. The K5s always had them mounted through the a-pillar.

 

[Metrodps]

The part that goes on pillar can be ordered from most cop shops or NAPA might be able to get them UNITY is one maker. The part should have a template sheet with it. Be careful because on some pillar post GM ran wires in them. The other thing is the length of the shaft (get your mind outa gutter) needs to be correct to clear dash and not interfere with steering.

I will post a pic or two in a short. On laptop not my regular putter

 

[4X4HIGH]

Not sure if i'm about to get a pee pee slap or not but i have a set i'd get rid of off of a CHP car.

 

[Metrodps]

Let me know if you need more!

Yea I know but I like the set ups! Now back off....or I'll run you in for D.C.

 

[cheyennek20]

Like the pic's but I can't decide if I only want to do 1 side or both....and I really have to wait until my rollcage is in to see if they will even fit.

 

[Metrodps]

Does anyone know if a company makes or someone has the Police spotlights for trucks or K5's. I'd put up a pic but I can't seem to find just the right one. Think.....The K5 from Jaws.

Go here and put Chevrolet 1987 and it tells you pn for lights and mounting.
http://www.unityusa.com/application_search.asp

Their main page
http://www.unityusa.com/Default.htm

 

[Metrodps]

Like the pic's but I can't decide if I only want to do 1 side or both....and I really have to wait until my rollcage is in to see if they will even fit.

Roof mount one in the center like the 5th picture.

 

[cheyennek20]

I'm not sure I really like that...although rollcage would no longer be an issue!! I think that if my cage is positioned right It wouldn't be a factor at all.

 

[Dabba]

eh to roof mount, yay to a post mount

 

[rjpastor]

I've never used one on a K5

But they were really handy in a car. Usually pretty bright lights too.

 

[Smitty]

I had one in my last K5 and didn't care for it. It was mounted on the A-pillar. I'd recommend you request some photos of the inside of the vehicle. Like you mentioned before, there's a good chance a full cage will get in the way of an A-pillar mount.