CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

Possible trade

gotmud77

1/2 ton status
Joined
Aug 4, 2003
Posts
688
Reaction score
0
Location
bellefonte
1980 chevy regular cab 8' bed This pic is of the truck before the cowl hood dana 60 and a few other items I will post a current pic in the next couple days.
For
95 and newer camaro or firebird V8 Or a 86-88 Monte Carlo SS

Installed the 81 and newer front end on the older cab
dana 60 4.10 welded, Brake brackets for the 15" wheels,
14ff 4.10 welded new brakes, ebrake cables, Yoke skid from diy4x4,1410yoke
454,t350,205
One rust spot on the drivers side cab corner. New cab corner included

The list of new parts
rad, front fenders, inner fenders, hood hinges, brakes, hubs, steering, 750 carb with elec choke, Dual 3" exhaust with flowmaster super 44 mufflers and cross over, Tom Woods driveshafts front and rear, B&M shifter, autometer guages, paint, rebuilt dana 60 with new hubs and all bearings and brakes,

Some of the other items on the truck.

Moon visor, steel cowl induction hood, full MSD ignition, yellow top, s/s fender trims, tonno cover, hitch, trans temp guage, deep tranny pan, 4" lift, 3" body lift and energy suspension body mounts, 35" mt tires with less than 2000 miles on them, 17' H2 wheels silver, heavy 1.75x3/8 steering tie rod with new moog ends,

I am sure I am missing somethings but I will update as I remember. Also I will post some pics of it.

Located at 16823

Its a driver. I drive it to work off and on. I wouldnt be afraid to drive the truck anywhere. Engine holds about 50-60 psi on the oil pressure guage.

Lots of new parts

Pics coming

$5500 OBO or cash and trade for 95 and newer camaro or firebird must be standard lets talk
__________________

100_0728.jpg
 
Last edited:

Latest Posts

Top Bottom