Wonder how long I've been missing a caliper pin 0.o eek
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Post up your BB15 build progress
- Thread starter mrk5
- Start date
Wonder how long I've been missing a caliper pin 0.o eek
Meh, you still got the other one.
I'm certified once again. All calipers are properly secured lol
Moving on to check the next 275 1/2 bolts
Moving on to check the next 275 1/2 bolts
Jason4x4
1/2 ton status
did you just bleed the brakes, or is the bleeder screw leaking?Wonder how long I've been missing a caliper pin 0.o eek
just bled, only reason I found the missing pin. Would have check everything else and passed right by it lol
TDAWG1
1/2 ton status
Can't wait to see y'all and what you've been building
All that's left now is to have the AC charged. I have an appointment tomorrow morning for that.
I just need to install the pinion guard once it arrives and grease my CTM's, then put the tool bags in the box and load up.
Stop for gas and Jack on the way out of town.
I want to load up Wednesday night so that when my passenger gets here from Denver Thursday morning we can throw his stuff in a haul ass.
Stop for gas and Jack on the way out of town.
I want to load up Wednesday night so that when my passenger gets here from Denver Thursday morning we can throw his stuff in a haul ass.
Guess I'm putting a new distributor in. When we drove out to run trails around Buena Vista I had to "borrow" an ignition control module (ICM) from Wade after the truck died and wouldn't restart until it cooled off.
That worked great for a 150 or so miles home and a little driving around home. I bought a new AC Delco module and put that in so I could give Wade his spare back. On the way home from the shop today it died once and restarted. Then died again about 2 blocks from home and wouldn't restart. Let it set for a couple hours and it started right up.
I've heard enough stories from several people recently that I'm certain the distributor is probably gone caput.
That worked great for a 150 or so miles home and a little driving around home. I bought a new AC Delco module and put that in so I could give Wade his spare back. On the way home from the shop today it died once and restarted. Then died again about 2 blocks from home and wouldn't restart. Let it set for a couple hours and it started right up.
I've heard enough stories from several people recently that I'm certain the distributor is probably gone caput.
Jason4x4
1/2 ton status
did you put the heat sync compound on the back of it?
Jason4x4
1/2 ton status
I just swapped a seat belt, got the new tire on, and strapped everything in the back down, need to load on trailer and it's ready.
Yes, used the entire little package of it. Also cleaned all of the grime off the distributor plate.
Jason4x4
1/2 ton status
went to put the yota on the trailer, and the battery was dead, so just went and grabbed a temporary one from work.
New distributor in, truck starts. We'll see how it runs tomorrow driving to and from work.
Did you do the RPT one?
Yep. Thanks for the info.
Today was 
Tonight
hoping to get it all done tomorrow.
Tonight
hoping to get it all done tomorrow.
Packed up and ready to go
I am blocking all of the CK5 emails until I get there. This is driving me nuts.
