CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Powdercoating! Bolts all the way up to ATV frames
- Thread starter RedDevil
- Start date
Randy92782
1 ton status
Looks good. Sucks you're still so far away. I might be sending parts soon enough though. Back to work so i'll have some play money tooAfew powdercoated parts from last night using our new Ultimate Chrome powder (no clear):
ULTIMATE CHROME
We now can get Hi-temp powder, good to 1200deg, in flat black and muffler silver. This is a good alternative to ceramic since the turnaround time is less due to the quicker application. This powder can be applied to heaters, misc. exhaust pieces and anything else that see's alot of heat in the engine bay.
blazin' j
1/2 ton status
awesome work...that stuff looks insane...
Randy92782
1 ton status
You wouldn't happen to have any pics of a set of headers you've done with this would you?/ I think this is a good idea
k5 krawler 50
1/2 ton status
pm sent. thanks.
Cory
Cory
Been a busy Saturday playing around with new colors 
Soft Nickel (I really like this color, came out super smooth)
Black Lava (I'm using this on my personal EVO valve cover)
Anniversary Blue (looks great in the sun, lots o' metallic)
RAL 2008 Orange w/ clear starlight (Just for the hell of it)
Soft Nickel (I really like this color, came out super smooth)
Black Lava (I'm using this on my personal EVO valve cover)
Anniversary Blue (looks great in the sun, lots o' metallic)
RAL 2008 Orange w/ clear starlight (Just for the hell of it)
blazin' j
1/2 ton status
sweet work...may have to send y'all some stuff soon...y'all do bumpers???
if so, how much would it b to coat this???
if so, how much would it b to coat this???
blazin' j
1/2 ton status
not 4 sure, but i'll check...figure around 6 1/2' as a guess...also it wieghs 175lbs...may b a lil expensive to ship...
I just measured our oven and its about 5.5ft inside, which room to hang the part. So I could probably do it but would need to hang it on an angle. If you can get me a definete measurement, I'll know for sure.
Nice!!
** New Pricing **
With fall right around the corner, we decided to lower some of the prices on the more popular items, just in time for those of you starting your winter projects.
Intake/IC piping - was 2$/inch NOW 1$/INCH
Bolt heads - was 2$ NOW .50
Brackets : small - was 7.50 NOW 5.00
medium - was 15.00 NOW 8.00
large - was 20.00 NOW 12.00
Coil spring - was 30.00 NOW 20.00
Intake manifold : 4cyl - was 70.00 NOW 60.00
: 6&8cly (2pc) - NOW 90.00
Sway bar - was 2$/inch NOW 1$/INCH
Transmission pan - was 45.00 NOW 30.00
Turbo compressor cover - was 35.00 NOW 25.00
Valve cover: 4cyl - was 65.00 NOW 50.00
-Inline 6 - was 80.00 NOW 60.00
- V6 - was 90.00/pair NOW 60.00/PAIR
-V8 - was 90.00/pair NOW 70.00/PAIR
- Polished letters - was 20.00 NOW 15.00
DSM trans - was 100.00 NOW 50.00 (blasting case is 100.00)
Engine block: 4cyl - 100.00
6cyl - 150.00
8cyl - 200.00
There is still a 50% additional charge for base/top/multipule coats.
As usual, if you have any questions, please PM or email me. Thanks! }
With fall right around the corner, we decided to lower some of the prices on the more popular items, just in time for those of you starting your winter projects
. Intake/IC piping - was 2$/inch NOW 1$/INCH
Bolt heads - was 2$ NOW .50
Brackets : small - was 7.50 NOW 5.00
medium - was 15.00 NOW 8.00
large - was 20.00 NOW 12.00
Coil spring - was 30.00 NOW 20.00
Intake manifold : 4cyl - was 70.00 NOW 60.00
: 6&8cly (2pc) - NOW 90.00
Sway bar - was 2$/inch NOW 1$/INCH
Transmission pan - was 45.00 NOW 30.00
Turbo compressor cover - was 35.00 NOW 25.00
Valve cover: 4cyl - was 65.00 NOW 50.00
-Inline 6 - was 80.00 NOW 60.00
- V6 - was 90.00/pair NOW 60.00/PAIR
-V8 - was 90.00/pair NOW 70.00/PAIR
- Polished letters - was 20.00 NOW 15.00
DSM trans - was 100.00 NOW 50.00 (blasting case is 100.00)
Engine block: 4cyl - 100.00
6cyl - 150.00
8cyl - 200.00
There is still a 50% additional charge for base/top/multipule coats.
As usual, if you have any questions, please PM or email me. Thanks! }
Some people have asked about wheel pricing, so here are the NEW prices !
13" - 35/each
14" - 40/each
15" - 45/each
16" - 55/each
17" - 65/each
18" - 75/each
These prices include all the stripping/prep/coating. If you send them already stripped/blasted, the price will be less.
!13" - 35/each
14" - 40/each
15" - 45/each
16" - 55/each
17" - 65/each
18" - 75/each
These prices include all the stripping/prep/coating. If you send them already stripped/blasted, the price will be less.
Damn, its been awhile since I've had a chance to post up some pics, so here goes!
Neon Green Enkei rims
Black Starlight w/ Red Sparkle additive
Black Starlight
Wrinkle Black madness!! Custom IC pipes and other misc. parts from a 300ZX
2 tone black w/ orange bike wheels
GVR4 IC pipes and fuel rain done in Mirror Black - smooth as a baby's butt
GVR4 Strut bar in Silver Vein w/ Candy Red ends
My Datsun 280Z intake in Candy Blue over Ultimate Chrome - smoooooooth 8)
Neon Green Enkei rims
Black Starlight w/ Red Sparkle additive
Black Starlight
Wrinkle Black madness!! Custom IC pipes and other misc. parts from a 300ZX
2 tone black w/ orange bike wheels
GVR4 IC pipes and fuel rain done in Mirror Black - smooth as a baby's butt
GVR4 Strut bar in Silver Vein w/ Candy Red ends
My Datsun 280Z intake in Candy Blue over Ultimate Chrome - smoooooooth 8)
