Price for. 205 transfer case ? 14 bolt axel ?? Dana 44 front axel ? What would you pay not for turn key parts either they all need some love ?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Pricing question guys help???
- Thread starter Chevk587
- Start date
Need more info. Which NP205? A full floating 14 bolt? Internal or external hub Dana 44? What gears? 8 lug?
Martin
Martin
Not sure which 205 it is it's a 195 ratio, the 14 bolt is a single wheel type FF ,the 44 is external all with 4:10 gears.
Martin is right, the value of the 205 will vary greatly depending on input shaft spline count (10, 27 or 32 spline) and adapter style (figure 8 or round). Also, is the adapter included? Does the 205 have a fixed or slip style rear yoke?
14B FF are $250-300 all day, some ask more but I think $250 is a fair price since you can buy them at the PnP for that price.
Is the 44 a passenger or drivers drop? 8 lug? FWIW I sold my 10 bolt, 8 lug, pass drop with 410's for 250 a few months ago.
the 205 range in price a lot, you need to provide more info as mentioned already.
I buy matched 14bff/Dana 44 sets for under $300, so location has a lot to do with it as well.
Martin
Martin
big difference, that's why I chimed in with our inflated prices.
I just wanted to make sure I wasn't paying too much I got a 205 front and rear axel for 3.50 plus a set of 8 lug wheels !
In my area, that 14bff would be about $100, more if it was super clean, had fresh brakes, or an open diff (since that's what you need in order to install a Detroit)
The d44 would be about 200-250, also depending on condition.
The 205 is going to have a big range like other have said, could be $100, could be $300. Depends what you actually have
The d44 would be about 200-250, also depending on condition.
The 205 is going to have a big range like other have said, could be $100, could be $300. Depends what you actually have
if they're in working condition I'd say you found a deal.
And I also got the rear disc brake conversion!
You said they all need love, how much?
For the purchase price of that stuff up here, you are better off getting ones in good condition, than buying ones that need work.
For the purchase price of that stuff up here, you are better off getting ones in good condition, than buying ones that need work.
They seem to be but iono who or what they came from or out of gonna check pre load and backlash out and go from there but the definitely need some work!!
