Sold PSC steering box

[Bent77]

Large input 36 spline
Flared hydraulic inputs for earlier trucks
No o rings
2wd output
Nevermind the paint, it took a brake clean bath

$300 plus shipping

 

[Desert_K5]

@Fastereddie Is this like the one on my 77?

 

[fourwheelerjeff]

is this the 2wd or 4wd version?

 

[muddybuddy]

Shipping to 22039? (Assuming 2wd)

What does the large input mean? I didnt recall there being a difference?

As an fyi, you can run these in newer oring trucks by swapping out the low pressure connection to the earlier flare style (easily sourced from auto parts store), and then sourcing the flare outlet from an older steering pump to run the flare style hose. I did this on a previous truck and worked perfectly, uses all factory parts

 

[Bent77]

I have AN adapters on the truck, flared for this style box

There are two different input drives
One is 30 spline, smaller for later trucks
The 36 spline is earlier

My 77 has been converted using a flaming river U joint drive

 

[Bent77]

Shipping to 22039? (Assuming 2wd)

What does the large input mean? I didnt recall there being a difference?

As an fyi, you can run these in newer oring trucks by swapping out the low pressure connection to the earlier flare style (easily sourced from auto parts store), and then sourcing the flare outlet from an older steering pump to run the flare style hose. I did this on a previous truck and worked perfectly, uses all factory parts

Yes 2wd
I’ll find a box and work out a shipping price and PM you

 

[fourwheelerjeff]

put me in line; that's why I was asking what orientation.

 

[Bent77]

Sold