JimmyJuneau
1/2 ton status
How do I ajdust the float levels on my 85 qjet?
1985 GMC JIMMY
1985 GMC JIMMY
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Qjet ?
- Thread starter JimmyJuneau
- Start date
chevyracing
1/2 ton status
Need to know the carb #.... if it is an M4MC/M4ME in 1985 carb #'s 17084500 through 17085003 were set at 12/32 inch. Carb #'s 17085004 through 17085298 were set at 13/32 inch for the float level.
You gauge it from the top of the casting in the bowl to the top of the index point at the toe of the float. You adjust the float by bending the float arm, making sure to hold the retaining pin in place.
It is hard to explain but easy to do.
John
Like to go sloppin' 'round in da mud in a rapid fashion....=)
<a target="_blank" href=http://coloradok5.com/gallery/albun31?&page=1>See my pics here</a>
You gauge it from the top of the casting in the bowl to the top of the index point at the toe of the float. You adjust the float by bending the float arm, making sure to hold the retaining pin in place.
It is hard to explain but easy to do.
John
Like to go sloppin' 'round in da mud in a rapid fashion....=)
<a target="_blank" href=http://coloradok5.com/gallery/albun31?&page=1>See my pics here</a>
JimmyJuneau
1/2 ton status
Do you know what the little bolt that you have to use needle nose pliers is for does that need to be tighten all they way down?
1985 GMC JIMMY
1985 GMC JIMMY
chevyracing
1/2 ton status
can't think of the bolt you are speaking of.
John
Like to go sloppin' 'round in da mud in a rapid fashion....=)
<a target="_blank" href=http://coloradok5.com/gallery/albun31?&page=1>See my pics here</a>
John
Like to go sloppin' 'round in da mud in a rapid fashion....=)
<a target="_blank" href=http://coloradok5.com/gallery/albun31?&page=1>See my pics here</a>
