CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Quick O2 sensor question...
- Thread starter jarheadk5
- Start date
Thunder
3/4 ton status
If the sensor in the 92 is a non heated single wire sensor. The one from the 87 should work. TBI single wire sensors were all the same as far as I know.
But if it is a heated 3 wire sensor you will have to replace with the same.
But if it is a heated 3 wire sensor you will have to replace with the same.
Go check it on acdelco.com. You can look the part number up by vehicle, then cross that part number vs. vehicles it was used on.
Pretty certain there is a LARGE variety of single wire O2 sensors unfortunately. Might be as simple as length of wiring or connector differences, but I know for a fact there is more than just one single wire O2 sensor part #.
Pretty certain there is a LARGE variety of single wire O2 sensors unfortunately. Might be as simple as length of wiring or connector differences, but I know for a fact there is more than just one single wire O2 sensor part #.
