bigboy
Registered Member
Does anyone know what all I would need to make a 3/4 ton rear axle with drum brakes a 3/4 ton with disc breaks?? do they sell kits or what can I just get a break set up from a newer 3/4ton and put it on my axle?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Rear disc brakes conversion
- Thread starter bigboy
- Start date
FYI, try the search option at the top. Look up "disc brake conversion" or even "14bff disc brakes". The search option has tons of info.
rick88blaze
1/2 ton status
Here's the brackets you'll need. You'll also need brake lines, calipers, pads and rotors. Offroad design Diy4x ebay
Rick
Rick
If it's a 14ff, then the links posted should help[ you out. If it's a 14sf you might be SOL.
6.2puller
1/2 ton status
In the Vendor Forum their is a company making 14 bolt SF kits now. It is a modedied FF kit by the looks. I don't remember who it was but look around the vendor forum.
