bowtieboy4life2000
1/2 ton status
ok how many differnt keys did thay make for a 87 blazer? i lost mine so what would be the easy way to get a new one?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
rear door key
- Thread starter bowtieboy4life2000
- Start date
Try another GM key. It works sometimes.
Clod_King
1/2 ton status
I can mail you my back door key. I don't need it anymore, because my barn doors are welded shut.
blazin_blazer
1/2 ton status
sometimes a dealer can cut a key by using the vin...i think that it may only apply to 88 and up vehicles, but wouldn't hurt to ask,
i had 1 made that way for a 92 astro van that had setup over a yr and was given to me that ran, but they had lost key, i only wanted the 4.3 out of it, but i spent $20, had the key made and drove it home!
i had 1 made that way for a 92 astro van that had setup over a yr and was given to me that ran, but they had lost key, i only wanted the 4.3 out of it, but i spent $20, had the key made and drove it home!
bowtieboy4life2000
1/2 ton status
ya if you don't mind can you send it to me. i tryed the dealer and they said that the truck is to old.
i'll PM you my adderes
i'll PM you my adderes
Clod_King
1/2 ton status
got the PM, I'll go to the post orfice on monday to get them sent.
Muddytazz
1 ton status
Remove the lock cylinder from the door, take it to a locksmith and have a new key cut. I did this a couple yrs ago on my old suburban and it was only like around $12 for the new key.
bowtieboy4life2000
1/2 ton status
how hard is it to remove the lock cylinder
Muddytazz
1 ton status
Its a slight pita but still very doable.
Remove access panel, roll window out (make sure to support it from hanging), unplug connector, remove 2 nuts that hold the key housing(chrome piece on outside of tailgate). Once in hand, just take the complete unit to a locksmith.
Remove access panel, roll window out (make sure to support it from hanging), unplug connector, remove 2 nuts that hold the key housing(chrome piece on outside of tailgate). Once in hand, just take the complete unit to a locksmith.
