CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

rear glass, push bar, r/c plane, 2wd sector shafts, reciever, 37s, more in here

Jishory

1/2 ton status
Joined
Jan 8, 2002
Posts
1,366
Reaction score
0
Location
Palmdale, CA
Rear window glass out of my 87 with manual crank: 35$
Push bar, was mounted on a k10: 45$
Towing reciever off of my k5: 45$
2 wheel drive sector shafts: 40$
Tapped top caps(1/4 inch pipe thread): SOLD
Air horn, sounds similar to krusty the clowns horn: 20$

DSC04693.JPG

DSC04696.JPG

DSC04697.JPG

DSC04701.JPG

DSC04703.JPG
 
Last edited:
Nitro r/c plane: only taxied around the street, hit some bushes, fixed it and sat in the garage for years, only selling because my intrests have swung to helicopters, ready to fly with a pilot who knows what hes doing, has everything you need besides a charger for the torque starter battery, I even have the box it came in with all the packaging/manuals: 175$
305 computer out of my 87 k5: 25$
Antique oil cans mentioned in the lounge: 10$ each
Stock dana 60 cover: 15$

DSC04699.JPG

DSC04702.JPG

DSC04704.JPG

DSC04705.JPG

DSC04706.JPG
 
Last edited:
id prefer not to ship and of the heavy/big stuff but ill check it out, the engine in the plane i think is an O.S. .40 LA, ill get ome more pics up tonight and get back with both of you on shipping prices
 
Jishory said:
id prefer not to ship and of the heavy/big stuff but ill check it out, the engine in the plane i think is an O.S. .40 LA, ill get ome more pics up tonight and get back with both of you on shipping prices

Right on thank's. I dont need the fuel but let me knw what you need to get for shipping if you can. If not no sweat.
 
Are the oil cans full? If so, I'd like them. Are they all in good shape? Shipping to zip 30121.

Thanks
Ron
 
its kind of tough to give a guess at what shipping on the plane would be, it includes the full radio chargers, glow starter, torque starter, torque starter battery(heavy), fuel pump, controller, wings... ill work on weighing all of that and fishing the box out of the attic tomorrow, without the fuel ofcoarse i dont want to deal with hazardous shipping, a jug will last you forever anyways

the cans do have some rust on the bottom i discovered, some a little, some more, some have none, they are all full and new, check out this thread for the story http://coloradok5.com/forums/showthread.php?t=208945, pmed you quote on shipping

also i have some free unopened atf bottles if anyody wants to pick those up

Picture 181 (Large).jpg

Picture 183 (Large).jpg

Picture 186 (Large).jpg
 
are the sector shafts in good condition?
 
sector shafts are in good shape, i have ran each of them and they worked good, the box around them is what failed :D

pmed you justin
 
sure i have one cap left, pmed you

front tire off of a 95 RM 250 is anybody needs one or the new tire: 25$

DSC04751 (Large).JPG
 
Don't ship that 12v Gel Cell...the one that you use in your field box to run the fuel pump and starter...its just not worth it. You can buy them for under $20 at a local hobby shop or order one from www.towerhobbies.com
I just wouldn't recommend shipping it due to weight and safety issues...


Hey on that front push bar...you said you had it on a K10...can it be bolted up while leaving the stock front bumper on? As in are the brackets long enough to reach around the stock bumper and down to the frame?
 
sure can, my cousin had it on his k10 with the stock bumper on

thanks for the tip with the battery
 

Latest Posts

Top Bottom